Search results for query: wiring harness

I know if I just started to tear into my dash, I would probably get my answer but..... 67 Fury II, is it likely the existing wire harness is pre wired for a map light and ignition switch light (pigtails)? Doubt if the fender signals would be but that's a lot more wiring.

The two areas here are the biggest concern they seem to be the only damaged areas of the harness. The black connector I cannot seem to find a way to repair. The bulk head connectors seem to be available Wiring Connectors Bulkhead Fits Mopar Dart Cuda Challenger Charger RoadRunner | eBay.

by doing it in the kick panel I was able to leave the original wiring to the switch intact and only had to add 2 new 12ga hot leads to the relays off the post of the circuit breaker...the leads on the sockets were long enough to splice into the existing harness for the brown and yellow

Thank you

Ok wire experts out there, installing a complete wire harness. Problem wires going to back windows appear to be 2 feet short. And wires going to door windows appear to be 2 ft too long. Wires are in origional wrap. I removed many yrs ago when i started the restoration. All fit well back then.

Do you still have this car? If so I'd be interested in the wiring harness, steering column, dash pad, and inside rear window trim. Thanks, James 469-222-4405

Yes, I have used Evans cables also. Great to work with.

Does your car have the wiring harness to connect to the motor? I've never seen a motor like that before. It's nice looking, but not what I thought a slab would have.

...A/C items. Emission control items. Or is it being automatically condemned due to "age"? Seems like others have mentioned Evans Wiring Harnesses in the past? With the harness removed, it can be a prime time to clean and refurbish the bulkhead connector as needed. Repair terminals ARE...

...diagrams that may help, but the FSM diagrams always trump them. I suggest printing the diagram out, then take a highlighter to the wire or circuit. You should be able to buy a replacement harness. Evans Wiring Harnesses - Mopar Only That may save a lot of time and money in the long run.

Original Wiring Harness - Ignition Lamp Mounts on steering column and is part of the time delay lamp option Part Number: 3488479 Used on all A-B-C-E bodies 1971-75 model years There are 2 harnesses available. Both are complete. One has a replacement non factory style connector end. $45.00 each...

Are the engine harness and the headlight harness two separate harness on a 68 Fury? Or are they all one harness? My Fury didn’t have any under hood harness when I bought it. So I’m trying to sort that out now. Thanks for any help.

Working on the dash wires. My brother owned the chrysler for many yrs. Apparently the fan switch failed during this time. So he spliced the wires and installed a separate switch. (Noticed that replacing the switch requires removing the instrument cluster.) I will restore this to origional...

Building a new wiring harness using bits from used harnesses and some NOS pieces. It has modifications including electronic ignition and changed alternator wiring but maintains a stock appearance.

Time to drag out the wiring harness board pic. I've repaired wiring harnesses by getting a piece of plywood and laying the old harness out. Then I outline it with marker and finishing nails. From there, once it's laid out, I start to remove the wrap carefully and then replace one wire at a...

...I rewired my engine harness and found the Oil Pressure Switch wire and the Cold Temp Switch wires had been crossed at the firewall wiring harness block. Only after replacing both sensors did this issue appear as it sparked when I connected the Oil Pressure wire to the new switch. I suspect...

Are the trim pieces in driver quality? None or very little pitting?

The “external shunt”? A section charge path wiring between two splices in the engine harness acts as the external shunt for the later externally shunted ammeters. It was not a serviceable part, having its own part number.

It's not uncommon for such broken wires to exist in old harnesses such as in our cars. Have you got your FSM wiring diagram? Trace the broken wires back to their previous junction points, based on their colors, wire gauge and relative position in the harness. Then you can pretty accurately...

Need a few parts for a 72 T&C. Got some parts from a 73 c body at Carlisle that were not the same, so need to be from a 72. 1. Engine Wiring harness for 440 2. Fan Shroud 3. Cruise control stalk on column 4. Any saddle interior parts- front door panels and rear storage/compartment area panels...