Separate names with a comma.
Both, the idea is to flush out just the block, it's gonna be nasty.. you could make some simple plugs out of wood too, just don't want that stuff...
That's why I recommend clamping off hoses, you want the water to run just into the block. And maybe use a magnet in there too
Oofta...If it must be temp, I'd pull it all out with pliers, remove thermostat, clamp off hoses, and run water into thermostat hole to flush it...
When I got my 65 New Yorker wagon ( 1600 3 seaters made) from derby guy, he told me MANY were lost to Derbys/monster truck rallys, they used to...
Of course there's the old cut a slot with a dremel and screw it out too
Here's home depot's model
Ontel Speed Out Speed Out Titanium Screw Extractor (4-Piece)-1000367 - The Home Depot
There's a 2 sided kit of bits for that, I know oriellys stocks them. One side drills, the other side grips, I'll try to find the name
How's the corrosion in the fuse box? Rust under the fuses?
Check compression too, might tell you if your off
Put # 1 to tdc and see if the rotor points to #1
You looking looking for show quality cars, or driver/projects also?
I used the lokar cable set up, there's alot of combinations of those kickdown linkages
I second that, got that on my wagon 413
I would assume so, as long as the bore is the same size
I got the valve body, looks like it's a lockup, mine is not
I swapped over non lockup parts, and installed the plate/tube in the bottom, however...
Looks like it's a Comnav Commander P2 advance autopilot system
My in-laws are looking to sell a very expensive boat auto pilot system. They have a home made vessel, and didn't put it in. Supposed $10,000 is...
There are many ways to bleed. It's best to SLOWLY pump the pedal, to slow bubbles from forming. Then, if I'm having an issue, I let it sit for a...
Does it come up when you pump it?
Maybe corrosion in a connection? Follow back from the head lights, and start testing, disconnecting connectors and use a test light to see if...
I don't doubt it