Separate names with a comma.
My 2-cents on this....(ok, maybe a nickel) 1. Carbon tax = good 2. Eliminating oil/gas by 2030 = ridiculous 3. Wind/Solar = good, but won't...
As an American, please believe me that neither LIBERALS nor CONSERVATIVES have a monopoly on corruption. Power corrupts & absolute power corrupts...
I've been looking at a similar issue myself on a b-body that has older Heddman headers. The only thing I can think of to minimize the clearance...
One good/cheap/easy test would be to remove the pink wire off of the brake pedal brake switch & run a hot wire to it (jumper wire from the battery...
Good point! Here's a crazy idea....pick one "centrist" Republican & one "centrist" Democrat and have them run on the same ticket. The...
Yes, it sure seems like it. It used to be that Democrats were the ones that didn't care about balancing the budget & spent money like crazy....
Yes..... I don't know why so many people disagreed with 413, but I agree with him to rebuild the original carburetor & keep the original intake...
Pictures would help. A very quick search showed your turn signal switch should be for/from a 67-69 New Yorker or Newport w/o tilt wheel and they...
You have a small-rod, forged crankshaft motor (that's good). I've never personally seen that unusual "scoop looking thing" under the harmonic...
I actually just put a set of Top Cats on my '70 Roadrunner convertible & I like the quality and fit. Maybe they did send you the wrong set?
Isn't there somebody else doing that already?
If they are not available from Legendary or Year One, then your best bet might be to find a customer interior shop & see if they can repair what...
Well, I have some different opinions vs. many of the posts above. 1. The gear ratio change to something like 3.23 (& corresponding speedometer...
As stubs300 mentioned, Walker mufflers have worked well for me. Also, I believe Cbody67 is correct about those Imperial mufflers (that sounds...
And make sure you don't use basic "auto parts store" O-rings or they will leak in a few days (ask me how I know). I got a set from firm feel or...
Well, here's my 2-cents.... a. It's a 440 b. They didn't make 440's in 1963, so that's not it c. I'm not a "numbers guy", so I can't say 1973 or...
I totally agree. This car could be driving for probably $300. It really didn't "cook" all that much....air cleaner (maybe), carburetor, wires,...
I've never heard of a shop making torsion bars to order, so maybe a single used one? Or a used set? I had a torsion bar break once while I was...
Well...….personally, I would just do the test that traintech55 mentioned. Do a full tune up & change all your fluids. Carry an extra ballast...
Cammando is correct. The only parts you need are the torsion bars themselves, boots & some wheel bearing grease. Maybe you should call around in...
