Search results for query: *

Need to determine which cyl(s) it is. Does it have new plugs and wires? Old wires can arc...

Oh sparkplugs I run some MSD platinum. A small bit colder as NGK GR4. The motor mount does seem pretty soft, as the rest of the car runs on Poly and it loud and rattly anyway, should I put some solid or polyloc motormounts on it? Id rather not....

I've determined it's the engine at around 3k rpm when car isn't moving. I can feel it misfiriing at about that rpm and creates a repetitive vibration. Could carburation cause this or the distributor? It's at cruise and not hard acceleration.

That seems like a reasonable price for this car.

The final clips are yet a very different location, get ready to Tour de France to find this location, still within 100 km of the other locations. Alan

I recently had the original radio in my '65 Fury III convertible rebuilt with FM, aux input, and Bluetooth capabilities. I replaced the old cracked speakers at the same time with new speakers designed for stereo sound. It sounds amazing, but the car won't start with it hooked up even when the...

Sold for $4,990.

So I’m finally at the point of prepping the rear half of my 1970 300 convertible for paint. The car had some very crude body work and a repaint years ago at the top of the rear wheel arches. As you can see in the photo someone just bent up a 90 degree piece and welded in along the top of the...

Beautiful car. Yep, one thing at a time will get you there. The good news is that most of the things I've fixed on the old Mopar's stays fixed long term.

let me know if you want any closeup photos or measurements before i install the carpet .cheers Paul

OEM Early 1970's V8 Auto Trans Kickdown Rod With Clip. It is original, not a china knockoff. It came off of a 1972 Cuda 340, but should work on several years and engines, and is in good original condition. $40.00. Local pickup, or buyer pays shipping.

Ate at one in Plymouth Indiana, mid to late ‘70s

This is a OEM Mopar 1970's Ignition Lock Cylinder w/key. This one came out of a 1973 Charger SE with a tilt column. According to my research this is the correct part for the following Mopars. 1972-76 A-body. 1972-74 B-body, 1972-74 E-Body with tilt column. It may be correct for other years...

THAT, i have not yet determined

th there's a machine shop in Texas that reccommends knurling above guide replacement, if wear tolerances is within .001"

thanks ... the guy i found, he offers service for bronze, at 6-700 bucks compared to knurling, which sure, is short term, but a 59 year old engine which is driven less than a thousand miles/year ... do i really need bronze inserts ?

This is a OEM Mopar Engine Oil Cooler #4140394. It came out of a late 1980's Plymouth Gran Fury Minnesota Highway Patrol Car with a small block 4bbl engine. It may work on other years and models as well.It is in good condition. This is all I have. I don't have the rest of the plumbing for...

I finally found a rust free 67 and I am now working to make it roadworthy and safe. I have replaced the wood veneer on the door panels and all the window motors except the vent motors. I have repaired the turn signal switch to fix the brake lights and the four way switch to fix the hazards. I am...

Wigwam Drive in Theater- Haywarden, Iowa 1953 - 1982