Search results for query: *

Vinyl or cloth? Here are two options where you can find something close. Deadstock Auto Vinyl Deadstock Auto Trim If you are going to drive it after a long sleep, for electrical safety, you should search for the posts- threads regarding Ammeter by-pass

It does have a pulse, admittedly some members are advancing in age but absolutely everyone who owns a forwardlook era car should sign up to be a member there. There are quite a few experts there second to none. I have found it as a primary valuable resource for my cars and I absolutely would...

Imperial riding on spider caps. :thumbsup:

Hi Travis: Search for this post - lots of good tire information. Get your Hankook Optimo H724 WW tires while you can! Check out Ironman Tires 4 X Ironman RB-12 NWS 205/75/14 95S All-Season Touring Tire | eBay

Pm sent

'

After burning another plug wire, I'm gonna try this.

No power.

I'm pretty sure the 68 heads have bigger valves and ports than the earlier ones on the 413. 68 heads should be the 906 heads which are open chamber, so you might pick up a little compression with the older heads buy I don't think it would be worth it. The 68 383 four-barrel cam is a little...

@Big_John Hey there, thanks for the link to the rubber plug, that worked great, appreciate it.

Sticking valve.

How about a picture of the interior?

These are photos from the stub frame I'm working on now - this is not the frame in the earlier photos in this thread (painted black) that I think is a '65 Fury frame with wedge engine mounts. The photo below shows a couple of stamped numbers, on the underside near the front corners: RMK18 2...

have cam and heads from 64 413. thinking of putting them on a 68 383 4bbl block. any one see any problems with this setup? 64 300 non ram parts. cam i believe is 260 duration and 430 lift on both.

Was on the northeast corner of Cooper Street at Madison Avenue, Memphis TN. Above, circa 1937. Being smack-dab in Overton Square in mid-town Memphis, too much to hope it would still be there. It isn't. Historical Aerials has it there until 1980. Below in 1958. All of it replaced at least...

https://garage.grumpysperformance.com/index.php?threads/burning-out-chevy-hei-distributor-ignition-modules.16056/

@ Thanks for letting me know. @detmatt I will let you know what pieces I need to upgrade after I get the set I am purchasing in the mail.

Selling my 66 New Yorker that is rust free runs and drives great. The car needs nothing it has a working A/C and dealer installed cruise control. It has new dual exhaust that is quiet. The car has a new radiator and carburetor, I have the originals if they are wanted The car is located in NH and...