Search results for query: *

I think I've seen more two tag wagons than all other body designations combined.

@shooter65 had alerted me to it. I am very grateful for the members who alert me to stuff before it gets posted here. All the eyes & ears possible are needed to scour the continent for the right car.

Agreed. Thank you for posting YM23T3C231990

After installing a "new" NOS switch, my compressor won't shut off in any position. After some diag, I found the new switch to be faulty. The "off" position dose not cut power to the compressor. It only works if I press the "off" button, then pull that button back out manually, then the power is...

1972-73 IMPERIAL FOR SALE Tracker starting NOW into INFINITY. it´s back, only $1.800. Try to find a 2 door that´s not completely rotten for less. You won´t. 1973 Chrysler imperial Vancouver WA; Runs and moves good start for project it does neet a soft plug i think . I'm open to offers or...

FF4 indeed; but, the L2F4 bench was removed at some point and the seats are now incorrect. Not from a Polara. Regardless it’s a nice and and the listing seems honest.

Sage green as I see it, and it looks good to me. Not a fan of the bench seats in general, though, and even less a fan of dark green vinyl. But the price seems reasonable, even at 15 K.

Like you said, the vacuum gauge can tell us "what" the motor is doing, but it can't "make" the motor do anything. My pre 1972 high compression 440 and 413 engines give best mpg and drivability (off idle and part throttle response) and best full throttle power with ported advance. I set the...

Now down to $9,500.

Man paint goes quick. Every pass on the quarter panel was a whole can basically. Hit it with 2 coats of zinc primer, all the weld seams with another 2 coats of zinc spray, and then two coats of regular primer with the seams taped over. Couple coats of silver tomorrow, then truck bedliner to...

Last I had seen it, the ask in Iowa had been lowered to $9.5k. It is now being flipped on Hemmings; the ask is $15k: https://www.hemmings.com/listing/1970-dodge-polara-806426 PS: Thanks to @polara71 for alerting me to the Hemmings listing.

I wish the transmission would just install it's self at this point! XD

Thank you, I will check that and see.

You are right, of course. Oddly, the old one looked a lot like my new, single diaphragm one, big diameter but relatively flat. I will post pics of the new one tomorrow.

@Big_John Thanks for the link to the Flexplate a while back, present day, I managed to get a supposedly SFI rated Flexplate and got the Trans & the Torque converter mounted in place with the somewhat stock looking Flexplate, with the Torque converter fully seated back to a depth of inch and a...

Will try to add pics tomorrow, thanks for the suggestion

Did you take that backing plate off I just went from manual drum to power drum on my 70. And when I took the backing plate off there was the wider holes for the booster behind it.

Check out the sellers profile on FB, they have several high end C bodies listed looks like someone's collection and based on the newer Dodge trucks also listed I assume a dealership owner.

About $22k US dollars. Don't see many two tagged C Bodies.