Search results for query: *

My recipe is a "liberal" amount of Permatex Ultra Black RTV on the valve cover to gasket contact side of the gasket and "immediately" set it softly on the "clean dry" head (that may or may not have a straight sealing surface) with the RTV that is between the valve cove and gasket still wet. Use...

Join me in welcoming @nz mopar to FCBO.

It’s the oem mechanical one

W Burnside - Portland Oregon L.A. WESTERN AVE 1924 PASADENA 1931 Old Orchard Beach Maine ME Boothbay Harbor Maine Longfellow Square

Make sure your valve covers are straight and only glue the gaskets to the underside of the valve cover and no gasket adhesive to the cylinder head. Then screw them down to spec. It you glue the underside of the gasket to the head, they will surely leak badly.

How bad is the valve cover oil issue? RH side only? Just curious, CBODY67

If you remove the pcv valve from the valve cover, it should not affect idle speed or mixture. If you remove the hose from the pcv, with the pcf still in the valve cover, that's a huge vac leak, but one which should kill the motor, mot just let it idle higher by the amount mentioned. Check to...

So this is gonna be a ton fun with the dash In

Keep in mind the factory installed it with the dash out of the car, they never thought about having to replace it later. Alan

It's a nice car, it deserves a decent paint job.