Search results for query: *

This where I moved my hose bracket.

I just did this past week end and I moved the hose brackets towards the back 3 or 4 inches. No strain or rubs in any direction.

Welcome, Are those 15" wheels? Disc Brakes? Is your plan to restore or be a driver?

I had one like the green one. I had the tilt Tele wheel and auto pilot. It was in the 90s. That car took a lot of abuse. I could never get over how substantially it was built. Like I said I abused the poor car. I ended up scrapping it. I wanted to save the front grill and bumper to hang in a...

15x7 police wheels off of marketplace. They used to be cheap and plentiful. I have about $75 in these with the sandblasting as they were pretty rusty. There's some pitting but I painted them with bedliner. I should put caps on cause I keep getting in trouble with my nuts showing.

I don't have any original OEM Pics but I have those on my 66

I haven't read the whole thread but I still have these on wheels..$100 pick up or local delivery near Syracuse. For Sale - 14 inch Wheels & Hankook Optima Tires set of 4 $200

Mopar Jack is in / near Clayton.

I have thought unusually high appraisals for anything(cars, jewelry houses etc) were a way for insurance companies to add $ to premiums.

Maybe the original squished down over the years? Is the spring wire thickness similar?

I made a tool that attaches to the damper with the pully screws. It's a lever about a foot long.i hadn't air tools at the time. 135 pound feet isn't that much really and a few wacks with a gun will likely torque it to a higher value anyways. If concerned use some loctite

If rebuilding a nice addition would be part throttle kickdown.

As far as I know these are C body only due to the thickness of the rotor. There are look a likes but they won't clear the thick rotor.

I was thinking about going with a sure grip but it's hard to come up with a good reason. I don't need it for driving in snow. I don't race it. Maybe an occasional burnout but I have had success leaving two marks with light air shock adjustment.

I had a 73 Roadrunner with the rear swaybar. I took it off as I thought made the car too loose. It handled better without it in my opinion.

My press is similar to the Harbor Freight 12 ton. It pressed the 8.75" tapered wheel bearings on easily.

It was a pleasure meeting Big John. Very likable and knowledgable. Suprising amount of C body MOPARS at the show. A large variety of vehicles overall. My 66 in between a beautiful 50s Corvette (55 I think) and a driver 57 MOPAR.

I would say you can.

My Rt Side hanger. No tabs

That is what i had on my car. (66 300)It is not what they refer to as a "tab style hager bracket" You need to look at the rear shock mount crossover structure. I did not have tabs there and did not require the special bracket. You can see the tabs on their pic. If you have no tabs you drill 2...