Search results for query: *

Unfortunately, the original Cover was lost by the previous owner. There is only the aftermarket cover. I'll buy an original one. Personally, I think this is nicer than the chrome-plated one. Overall, I ask myself what speaks against the originals? A 360 was previously installed. I don't...

While looking for a valve cover, I remembered that my engine is a 440 from 1972, which makes the search a little more complicated. Do I still need a matching cover for C Bodys from 1971? Should these fit? Auto Metal Direct Valve Covers

Thanks for the quick replies. I assumed that the valve covers fit all models and that it was due to the power brake booster. I was probably mistaken. I'll look for valve covers for the 1971 C bodies. Many thanks for the help

Hello On my 1971 Fury the power brake booster hits the valve cover. When looking for the error I tried to find out which would be the correct power brake booster. I found the following numbers in the parts catalog: W Auto Trans 3579267 Unfortunately, the search for the number was...

I found the part number. But unfortunately I couldn't find a wheel. That's why I looked for help here. It's probably not due to my incorrect search, but rather due to the part not being in stock. Thanks in advance. I keep searching

I had problems with the heating in my 1971 Plymouth Fury III with A/C. This didn't work. So I removed the blower motor. Unfortunately the material of the blower motor wheel was very brittle and cracked. I’m looking for a blower motor wheel. What size do I need for the blower motor wheel? Is...

Thank you very much for your message and support! I swapped the turn signal relay. there has been no change. I inserted two new relays. the problem still exists. I replaced the turn signal switch in the steering column with a new turn signal switch from my reserve. there was no change. I...

I found out that the cable connects the fuel warning relay and the lighting. So it has nothing to do with the hidden lights. I will send the relay to a friend who will check and repair such parts. Can the flashing indicators indicate that the relay is defective?

I’ve found, that the relay is a „fuel level warning relay“ https://www.moparmall.com/MoPar-983828-3879514-Low-Fuel-Relay-p/823-107.htm Where can I get a new one?

I have problems with electronics in my 71 Plymouth Fury III. The turn signal indicators are shines continuously. The fuel gauge doesn't work. Today I also took the dashboard apart. I noticed a cable that made me suspicious. The Fury was once retrofitted with hidden lights. But these were then...

Thank you for youre post. Yes, you’re right. But I’m not sure about the right part number. I’ve this pics. The number I need ist the 10, 11 and 15: 3419 032-3 3579 598-9 2933 624-5

I am still looking for vynil molding for my 1971 Fury III. I need the parts above the window to the back and in the corner of the window. Attached are photos of another and of mine Fury with the parts marked. Thanks to the support I found and got the parts from the window to the trunk. now...

Welcome from northern Hassia (nearly Cassel)

Hello After a lot of testing and searching I found the error. The cable has a loose contact where it passes through the rear. Depending on how the cable is laid, everything works or doesn't work. The apron is rusted. As soon as it gets a little colder and the weather gets worse, I will...

I checked the cables front to back. All plugs disassembled. Checked the lamps. In the end, I guess I shouldn't have started at the front... there's a chassis ground error! I ran a wire to the bulb socket directly to the battery (-)...like magic the brake light is working again. The lamp...

I took the fury apart again. The cables all look fine. Contacts are a few oxidized. I cleaned them up and put contact spray on them. Oil display - without function (no cable on the oil pressure sensor) Brake - never worked Turn signal left - is always on Right turn signal - comes on when key...

Today I finally found the time to swap the turn signal switch. Everything was easy to disassemble. The old switch was quickly exchanged for the new one. Unfortunately, the whole thing didn't change my problem. So now I'm going to ask a friend for help and test everything once.

I think swapping the switch won't be a problem. The photos in the service manual look simple.

I ordered the turn signal. As soon as I've installed it I'll let you know if it worked