Search results for query: *

  1. mopar Joe 65

    For Sale 4bl manifolds for sale

    I have two 4bl intake manifolds one for a 68 383 # 2806301 And one for a 65 383 # 2205968 $ 25.00 ea. plus shipping cost ? Location , tremonton, utah
  2. mopar Joe 65

    Can you delete a post or change it ?

    If you want to add to a post or delete it is that an option ?
  3. mopar Joe 65

    WANTED WANTED 4 C Body Road Wheels

    No problem, thanks.
  4. mopar Joe 65

    WANTED WANTED 4 C Body Road Wheels

    I have 4 14” wheels off of my 65 fury but I don’t know what it would cost to ship ?
  5. mopar Joe 65

    How to update a post ?

    Can you reduce your price or do you create a new post ?
  6. mopar Joe 65

    For Sale 65 & 68 carbs for Plymouth fury

    K7. 4401S. Carter AVS for a 68 mopar 383 Also 3856S. Carter AFB. For a 65 Plymouth fury $ 50.00 each plus $ 25.00 for shipping Tremonton, utah
  7. mopar Joe 65

    New oil leak on my fury

    well I got it back together and as luck would have it I took it for a drive and warmed it up and it still leaks . What now ? I used a 440 source retainer but the orange rubber sides didn’t want to go in very well so I filled the grooves in with ultra gray sealer without the seals.I don’t know if...
  8. mopar Joe 65

    New oil leak on my fury

    Could someone tell me if this oil is ok for my change ? Is the 5w to thin ? I normally use 10w 30w.
  9. mopar Joe 65

    New oil leak on my fury

    Hey big John , you will be happy to know I retired my glass fuel filter. It don’t look as cool but I really don’t want it to go up in flames.
  10. mopar Joe 65

    New oil leak on my fury

    Also I would like to add my tie rods didn’t want to come loose but I got the right side inner one out and was able to pull it down enough to get the pan off and I didn’t have to jack up the engine.
  11. mopar Joe 65

    New oil leak on my fury

    Thanks for the tip, I did check everywhere first . I finally got the seal out but I had my doubts the silicone sealer was holding it in so tight even with a hammer and punch it wouldn’t budge, I didn’t know what I was going to do and my wife asked if I tried heat ? I didn’t want to burn my car...
  12. mopar Joe 65

    New oil leak on my fury

    Thanks for the input guys I guess my pictures weren’t very clear , the right side of my engine has the pvc valve with the red hose attached to it and it goes to the vacuum port on my carb. The vent hose from my oil filler cap goes to my air cleaner. Do I need a breather hose from my oil cap ...
  13. mopar Joe 65

    New oil leak on my fury

    I have a problem and a question , my car was running pretty good but i think my crankcase ventilation was pulling too much blow by when I had it connected to the back of my manifold so I changed it to go to my carb instead, I’am not sure why but it seems to idle and run a lot better this way...
  14. mopar Joe 65

    Vacuum Question

    Thanks guys for all your advice, I think the metal fuel filter would be better I just like the looks of the glass but I don’t like it so close to the manifold.
  15. mopar Joe 65

    Vacuum Question

    Thanks for the input, I think I will cap off the manifold and get an oil cap without a nipple on it . What do you think ?
  16. mopar Joe 65

    Vacuum Question

    I think there is a place on my air cleaner I can mount a nipple for a hose. Or can I just run it without the breather hose ?
  17. mopar Joe 65

    Vacuum Question

    Thanks for the input guys , that’s right big John the red hose goes to my pvc valve does that part of it look ok ?
  18. mopar Joe 65

    Vacuum Question

    On my 65 fury I have an aftermarket air cleaner so I vented my valve cover to the back of manifold I just ran it for awhile to charge up the battery and noticed some oil on the hose if I pinch the hose you can really feel it sucking and the idle drops way down, does this sound normal ? Also...
  19. mopar Joe 65

    Driveshaft yoke

    Thanks Xenon , that’s what it looks like.
Back
Top