Search results for query: *

  • Users: DaPoz
  • Order by date
  1. D

    727 trans pan gasket that doesn't leak??

    Which black high-heat sealer do you use?
  2. D

    Yet Another Chrysler Turquoise Engine Paint Thread....But Maybe The Last?

    Didn't the Hirsch Turquoise match, others have sworn by it. Have you tried this company? The paints I have bought from them are a dead on match. The Silver Argent matched my 300 K grill shell perfectly. MOPAR Engine Restoration Paints They list it for the '66 383.
  3. D

    WANTED 1963 1964 Chrysler small parts wanted

    I am looking for some small bits, a headrest cover plate that would fit the pre '64 single post headrests. Black prefered, but if they came in another color, I can paint it! Also looking for the '63-'64 LH door handle gaskets as pictured, without the holes crushed through!
  4. D

    Petronix Flamethrower distributor on a 413 single 4 barrel

    Has anyone installed a Petronix Flamethrower distributor on a 413 single 4 barrel? I have a 1964 360 HP 300K. Did you make any changes to the springs or advance limiters? Or run it as shipped? The service manual advance specs for the dual point and kinda vague. Plus, these motors ain't new anymore!
  5. D

    WANTED 1961-1964 Chrysler tinted LF door glass needed

    It would show the word TINT next to the Chrysler pentastar and PPG logo in etching at the lower rear corner of the glass if so.
  6. D

    WANTED 1961-1964 Chrysler tinted LF door glass needed

    Looks pretty good as long as there are no scratches on the glass. I can't tell if its tinted from the pictures. My glass is great. The slot has gotten a gouge worn into it which is why I am replacing it. I'd like to see this part of the glass frame on yours to be sure. Thanks!
  7. D

    WANTED 1961-1964 Chrysler tinted LF door glass needed

    Also, if not too much trouble, I am looking for the door handle gaskets if they are in good shape, no holes I mean.
  8. D

    WANTED 1961-1964 Chrysler tinted LF door glass needed

    If the window checks out, it will be easier on you to just drop it off at a UPS or FedEx to have them box it up and ship. My cell is 630.205.0544 and I will pay them directly. Sound like a plan?
  9. D

    WANTED 1961-1964 Chrysler tinted LF door glass needed

    Ok, if it is tinted and in good condition $60.00 will work. Need to see the glass and the slots in the lower bracket. UPS and U Haul sell picture / mirror boxes for shipping it, not sure about FedEx.
  10. D

    WANTED 1961-1964 Chrysler tinted LF door glass needed

    Manual or power window part numbers are the same for left front door two door hardtop tinted.
  11. D

    WANTED 1961-1964 Chrysler tinted LF door glass needed

    I am looking for a 1963-1964 2 door hardtop Chrysler tinted LF door glass. 1961-1962 are same part number. My lower frame slot is shot.
  12. D

    WANTED 1964 Chrysler 300 trim needed

    Two doors and four doors have the same part number. Do you have a drivers side?
  13. D

    WANTED 1964 Chrysler 300 trim needed

    DOH! Two door hardtop.
  14. D

    WANTED 1964 Chrysler 300 trim needed

    I need a 1964 Chrysler 300 drivers side horizontal stainless drip rail trim. The 300 is thinner than other models. Thanks, Allan
  15. D

    66 300 Door Water Shields

    Give these folks a shout, maybe they have your. They say they may have kits for 62-71 convertibles. I bought a set for my 64 300K.
  16. D

    WANTED 1964 300 K door panel and trunk lid needed

    That's great! If easier, you can text them to my cell. 630 205 0544
  17. D

    WANTED 1964 300 K door panel and trunk lid needed

    Have you had a chance to get in touch with your friend in Crossville? Does he have these parts?
  18. D

    WANTED 1964 300 K door panel and trunk lid needed

    OK, I would appreciate that! Thanks!
Back
Top