Search results for query: *

Good luck with your search. I've never heard of Flemings, obviously some sites are better than others, but be concerned with the car, not the site so much.

I purchased the ABC's, great product, hole location for transferring the trim pieces is spot on. One thing though, (I'll say here my painting skills are not the best), I bought the white/Paint to match. Cleaned them as instructed but had a hard time getting the color to cover correctly, I'd...

As far as specific differences between years, others here will have more knowledge than I do. When I was looking into converting mine to power brakes I found that the placement of the brake pedal pivot points are different, set up for more leverage for manual brakes. You could use the manual set...

Just a suggestion, I understand and support your passion, (I'm a fan of the 3rd pedal also), you may want to broaden, not necessarily lower your search. The reality is the % of C bodies with manuals are low, 4 speeds lower yet. Good luck though!

https://www.hemmings.com/auction/1971-dodge-super-bee?fbclid=IwAR0ZsSfhnX7uC0fAbrYkpJcF2WcndzwEngB_ARs-uQnxSW0G4cJDZ-bTzMw

You never know until you ask, good luck!

I've wondered that too. I did a quick check on an auto pedal/booster/Master I wanted to use for reference or parts I have and the of the actuation rod to the top bolts of the mounting plate look to be the same, (approx. 5 inches), so it should line up. I'd heard before the difference had to do...

Sorry, no. I believe the manual set is on the left but not 100% on that, I sure others will know. I have a 68 SF w/4 speed and manual brakes. I've been looking at converting to power but got hung up on the same thing.

Don't know if this will help, I'm not sure where this came from, (probably on this site), shows manual and power brake pedal sets side by side.

Power or manual brakes?

For Sale - Air cleaners

Just a thought here, can you rebuild that one?

What's your price range?

Others may chime in to correct me but from what I've see, (never took measurements), they look to be about a 1/4 inch plate, welded to the floor pan with about a 3/8-1/2 inch fine thread and a shoulder bolt to allow the belt to swivel. Best to look at later cars for an exact location and...

Nice looking interior. Are there proper anchor points in the car?

Welder Guy posted this awhile back, if it helps. I finished building my 69 fury dash Tach today

I'm sure it would be a loose fit if everything was new. I tried using a feeler gage to clean the slot out, it didn't take much force, the shaft was rusty and 50 years old.

I have an auto brake pedal from a 68 w/trim ring. If it's the same let me know.

I received the part from Dynamic Renovation, no problem and nice product. Went to install and the shaft broke at the split. Only alternative is to pull the manifold and replace the whole thing, so that's that, (for now). That's not happening until the motor is out and on a stand. Wouldn't want...

I just ordered one from Dynamic Renovation, $20 + $7 to ship, I'll see how it goes.