Search results for query: *

It would be hard to believe that the 300 had different sizes and shapes of head rests that were available as options in 67. Unless they were different for bucket seats vs bench seats? Mine are slightly wider than 11 inches at the bottom, 4.5 tall but tapered from wider at the bottom to top. Also...

Wanted! A Buyer! See later post for details! That's a great deal, Mopar Mike, the centers and calipers look like they have been in a tub of old oil or something for many years, (probably not a bad place for em either!) C Shaft

What year car and what style of pulley? Solid wheel or wagon wheel? C Shaft

These came out of a 1968 Newport Custom I believe. L-3444 RT and L3445 LT. As you can see the little notch that holds your cancer stick is on opposite sides. Might be different for other years or models of cars with same double ashtray but would not make a lot of sense if they did. CG

Right side or left side?

Easier for you to do the search Ross! By the way, if you happen to see the Chrysler 66-67 vertical switch for a power vent window, for cheap ........ LOL. C Shaft

Ok, that makes sense, but how is the rubber strip attached to the front of the tonneau cover? Glue, or sewn in or? I would love to be able to anchor it to the back of the seat somehow, but there is no where to install the snaps. CamShaft

Now that gentlemen is a question that has been on my list for a long time. My 67 300 convertible has that "rail" affixed to the back of the seat but what does the corresponding "female" end look like that would have to be attached to the tonneau cover? My cover has no snaps on it for the length...

Are you looking for the "turn signal lens" or the complete turn signal with the lens not broken? As someone who has hunted for these in nice condition for a long time, I wish you luck. The hardest part to find is the plastic mounting bracket that goes inside the fender and holds the whole...

Checked at DMT already, forgot about and found what I need at Classic C I, although they do not list items for C Bodies. Found them under Dodge Plymouth. Too bad a couple of $2.99 items cost $30.00 to ship! Ah well such is life! Marty, really hard to decipher part numbers, looks like 2189098 on...

All: trying to find some replacement grommets and plugs for the trunk floor of my 67 300. Tried Steele with no luck. Any suggestions? Looking for these in the photo. Camshaft.

Down to the final bits on my Chrysler 300. Looking to see if anyone has any of these switches stashed away and is looking to sell them? I know I can send mine to Devin for rebuild, but I thought I would see what is out there? Must be a solid 7.5 out of 10 with crisp toggle movement. Looking for...

I know that power window motors and rebuild, refresh threads for them have been gone over at length on this forum, but as someone who is going through this right now with my 67 300, I wonder if it might not make more sense to just purchase the Dorman repops and change out the brackets? I thought...

Great thanks.

Paul says my bases and motors are good, he will clean up, lube and grease them. So best bet for me would be just to get the solenoids, I think, unless you have complete working units for a great price! BTW, I got the vacuum cannister and trunk release button about an hour ago. Just getting the...

Matt, I sent a note to Paul, who is doing the electrical work on the 300. He says that the "solenoid packs" are burnt out. Each seat has 3 and they can be replaced individually. Do you have those? If so, I would need 6 I guess? Cam

Down to final bits and bites on the 300 Drop top, only a year behind schedule! All engine compartment wiring done, under dash done. Getting ready to fire her up next week! When powered up, we ran through tests on convertible top, works, lights, radio, reverb!!, antenna, perfect!, windows...

As mentioned in previous posts, my 67 300 Drop top did not have a vacuum cannister when I acquired it 25 years ago. Has vacuum gauge on console and remote trunk release. Looking for a vacuum cannister and the remote trunk release button that goes in the glove box. Anyone? C Shaft

All: Right down to the final push on my 67 300 drop top and my pal (who has been a great source of knowledge and assistance) knocked my Right front clear turn signal off the bench onto concrete floor. Needless to say, it did not survive! I have put back together for the time being but would like...

All: Anyone know of a manufacturer who replicates these clips and fasteners? Been searching through a lot of sites to no avail. Any help appreciated. The clip is 1 " long, and the stud is 1/2" high. Cam (shaft)