Search results for query: *

I bought these covers from Legendary a long time ago before sport fury covers were available. 68 Newport to go with 68 seats. A longer story follows that decision but here are the 68 buckets (passenger reclines) with Camaro power seat tracks in a 69 Fury. I have the tracks all the way down cuz...

I put recovered 68 Newport bucket seats in my 69 fury convertible that had a bench and used 93-02 6way Camaro power seat tracks. I intend to do a write up when I do the passenger side. The dimples in the floor pan were there so I just opened them up and drilled through the support brace. So 68...

Before I reupholstered my seats I added these little helpers - very redneck. Weaved them between the springs and tied them to ther springs with coat hangers. Be very careful where the sharp ends are facing. It helped as long as you could tie in springs that were not as saggy...

I will be doing a DSP also but I'm holing out for one with Optical input to strip out the noise. Any more info on your build would be appreciated. Ive got the amps, speakers and most wiring plus a digital toslink out bluetooth receiver. DSP is last. I should just quit waiting and get the expert...

I was thing that too about the 3D print Tell me where that 3d file is (.stl) and I can get it printed in ABS at the local maker space. My printer is not ready yet. However A piece of luan will work too for not much $

found another neo speaker..looks like a faital clone from brasil. in stock at least Home Home

Just build your own mounting plate and move one speaker closer to the other. I say that without knowing how much room you need but it looks less than 2" maybe? If it still doesnt work you need a neodynium magnet on the woofer which will be more narrow and give you more room too. Like stock...

Along the lines of a faceplate hiding a more modern radio, I have access to the 3D scanner and scanned an original radio. Not good enough so working with some more experienced people to get a better version. And the idea of magnets to hold it to some metal left and right of the new head unit is...

why No?. The new radio is in a mount cage that typically is bent around surrounding plastic or dash support structure.

Seems to me you need a section of angle iron to allow the 2 front bolts on the original radio to bolt to the dash frame . Then another piece of metal to make a flat shelf to allow the new radio cage to attach to. That and filler pieces on left and right.

I put in the factory loop without mass backing. Used the dynamat type stuff and then on recommendation from a local car builder put in this foil/foam radiant barrier. Its only 3mm thick. Along with new carpet its plenty cushy enough for me and in places like near the gas pedal I couldn't have...

I stiffened a floppy torn cardboard glove box with fiberglass resin. Soaked in nice. Hard as a rock. the next time I remove my door panels I will use resin to shore up the clip holes which seem to tear a bit every time.

Also search under "grommet".

I'm betting any mold/mildew cleaner used for vinyl house siding would work too and could get at Lowes in large qty.

Just put on clear seat covers and wear gloves. Tell people in your wellness search you discovered a way to get your probiotics while you drive.

I'm thinking remove the seats and get them in the sun. Once good and dry a bristle brush to loosen stuff and vacuum before adding anything wet. If no holes in seats consider - hose. Maybe houshold wet vac. Then get the carpet out and toss it in the bin. Thats just the start.

An update on reinforcement techniques. I have been using superglue with fiberglass cloth as a strengthener. You don't even need baking soda - the cloth hardens in a second and I think is better than using a metal screen unless you are trying to produce a certain contour with the metal screen. I...

some types of floor underlayments are closed cell foam. way more than you need but probably easier to find

I was surprised how well just scraping with the back of an exacto knife worked. I had some chrome ashtray inserts that looked beyond salvaging and had the bottoms rusted out out, The tops were 50% covered with rust and crud. I hit it with a couple cleaners and it got a little better. But what...

Here is vinyl tape/wrap on my sedan insert I converted to convertible insert. The inside corners have a few wrinkles which with better quality/flexible vinyl wouldn't be there. They dont even make the vinyl I used anymore. I was concerned it would not stick under heat of the sun so I used some...