Search results for query: *

Van's has the specific 65, 66 tank in stock. For anyone needing a 65 Fury side fill tank, they have those too. Gas Tank 1966 Fury 1965 - 1966 C-Body Kevin

I think Legendary has skins for the 64 300's in vinyl and leather for the Letter Cars. Kevin

No first hand personal knowledge but I know someone that used 5th Ave spindles on a 62 300 which I believe has the same front end as your 64. I think he had to mix and match some tie rod ends and ball joints to make it work. A set of Cordoba caliper adapters allows you to run the bigger 11.75...

I believe they were just called full size at the time, no letter designation for the platform itself. They are more than welcome here. There are a several Letter Car guys here. Kevin

Nice car!!! Not a C-body by the way. C-body started in 65. Did I say nice car? :thumbsup: Oh and welcome aboard! Kevin

If it was me in a perfect world, I would have either found a big block 65 trans and rebuilt it using the late model input shaft and front pump assembly for better torque converter selection or got an output shaft and tail housing from a 65 and rebuilt the 64 trans with the new style input so I...

When the railroad was still in service, rail cars would be blown off the tracks too. Wreckhouse, Newfoundland and Labrador - Wikipedia Kevin

Good deal. Car looks great and if the only issue was that pinion seal, I'd say it was a trouble free road trip. You should give everyone a little primer on The Wreckhouse. Kevin

There's a blast from the past!!! Welcome! Did you ever get that multi 2.2 turbos project spooled? Kevin

Love that colour. Kevin

I've not done it myself but I believe you use the fmj lower ball joint assembly which incorporates the steering arm and it bolts to the spindle. The ball joint attaches to the lower control arm. One of the guys on Moparts did it on a 62 which should be the same as your 64. I think his username...

5th Ave spindles or any other FMJ body spindle apparently can be coaxed into working in that application. You need the early B-body style Cordoba caliper adapter so you can use the 11.75 Cordoba rotors. As far as kits go ECI has a well engineered one that will allow you to use your drum brake...

So it's had an engine change. Kevin

I've seen that Dynamat stuff at shows and they want a boatload of $$$ for it. Other than the shiny foil I don't see much difference between it and Iceshield rubber roofing underlay and you can do several cars for the price of one Dynamat job. Shop Grace Construction Products 36-in x 75-ft...

Marglass or 3M™ Short Strand Reinforced Filler as it is called now is just the ticket for for that job. 3M Short Strand Reinforced Body Filler gallon 1160 Kevin

X2 for National Moparts and Nigel is a C-body guy. Did you get to keep the salvage from your old car? You might have been able to unbolt the complete front subframe and roll another one in with a new front clip. Kevin

A long way to ship but... http://www.kijiji.ca/v-classic-cars/calgary/1967-dodge-monaco-500/1091187164?enableSearchNavigationFlag=true If a 68 has the same roof there is a Monaco 2 dr parts car local to me that can be bought reasonable. http://www.boneyard.ca/index_files/Page644.htm Car has...

FUBAR'D spindle is a good excuse to swap to disc brakes. Bolt in swap with 69-73 disc spindles with 73 being the spindle of choice. Kevin

What kind of wheels are those? They aren't what you would normally see on a C but not as completely out of place as some of those Donk wheels are. Kevin

All Canadian production got red engines up until 1969. Kevin