Search results for query: *

after a lot of forum searching used an oil called "Liquid Bearings" cause it allegedly wont gum up...stupidly expensive for a bottle that small

x2 on the psc 1000...had a real SafetyKleen machine in my business for 40 yrs...NOT cost effective for a retirement shop...the PSC 1000 gives results equivalent to the SK...i like the fact that it leaves a bit of an oily film as that keeps stuff i've cleaned from flash rusting immediately...then...

the post office here is awful...a DMT order never showed,the post office geotracked it and claimed it was delivered to the wrong address...swore they sent a supervisor to the location (twice) and the package was gone...this took 3 trips to the PO thats 10 miles away to get to this point...called...

A/C or not?

go to fasteners...find the pdf for bumper and carriage bolts...they are on the last page of that pdf...FA2483 H...if you print that page the bolts come up actual size so you can compare them with what you have...they ship them thrown in a bag so the stainless caps can get beat up in shipping so...

projects that go together quickly only exist on television...i have a 57 VW that i haven't turned a wrench on since 1980...a 70 chevy stepside that was my daily driver since 75 that i started a resto on in 1994 that still isn't done...it got painted and everything but the bed done during the...

not saying there is a repop for yours...just saying a yellow bottle really isnt such a bad thing

if it makes you feel any better earlier style reproduction bottles are available in both white and "yellowed" so they look more like an original bottle...

on my 68 fury there is an extra red wire attached to the ammeter post that goes back to a circuit breaker buried in the drivers doorpost behind the kickpanel...this is where the top circuit gets its power from, not the fuse box

did float itself leak and fill partially with gas?

Steele Rubber in North Carolina...

considering most of their seat stuff appears to be out of stock i think you should order sooner rather than later...

like a Moog k7061 but missing the bushings that go around the bar itself

i would guess the hardware for an aftermarket replacement front sway bar link...the 2 piece type

for a follow up...dropped my bumpers off at Tri City on 9/14 when i went up there for the Bristol Nascar race...think they called back on the 27th to say they were done...picked them up yesterday...I think that's a world record for chrome shop turnaround...they were 2 grand though...

he also has stuff that fits our cars that he's not aware of...its listed as b body stuff but it interchanges...so look around on the site our stuff is all over the place, not just in that c body section

ok if you have a no crank situation...there should be a starter relay on the fenderwell behind the washer bottle...a big red wire goes from the battery cable to a 1/2 inch nut on the relay...below that is a terminal(1/4 or 5/16 nut?) with a black wire that goes to the starter solenoid...if you...

tri city quoted me 800-1000 to redo my fury so chrome isnt cheap at the moment

from what i've heard about SMS getting anything correct within a year is an accomplishment...there's guys on here that have had problems with vinyl tops being wrong and others waiting years for door panels

got my molded hood pad from Mopar Mall and was NOT happy with it....made by REM...not cheap, holes punched in wrong spots, extra holes for different applications that you can see the cut circles after its installed...came with clips that were completely worthless (not made of spring steel and...