Search results for query: *

A little hard on the eyes and a bit overpriced I think... https://www.facebook.com/marketplace/item/1501231370476312/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks Seller's description 1969 Dodge Monaco Convertible - 360 cu 5.9L V8 w/ automatic transmission...

Now in the process of putting everything back together after replacing the timing chain on my 440. I've got about 25-30 bolts to reattach. If a person (such as myself) is too lazy to look up or determine torque specifications for individual bolts (cam gear, crank bolt , timing cover bolts) then...

whats the best stuff to use to remove vinyl top residue from the exposed roof ? (still have to remove edge trim) thanks mark

2 boxes, 2 caps in each. USPS priority International. Buyer pays the shipping. Easy peasy. I've helped our friends across the pond quite a bit. It's not cheap, but if they cover the cost it's pretty simple and straightforward. Their addresses and postal codes look strange as hell.

See it now. Thanks,

No picture

I recently had a shipping company come to my house and pick up a set up bucket seats for a dodge challenger. So I would imagine it’s doable. But the buyer did the research.

Good morning. I’m not sure how to ship them to Poland. I could box them up obviously. If you want to take the time and effort to research shipping company near me, I can drop them off for the gasoline fee but you’re gonna have to spend that time figuring out transportation. I don’t think I...

Hi does anyone have a source for window 62 imperail coupe rear window motor left window is stuck down thanks

In the earlier days of emissions controls, it was felt that an open chamber, lower compression ratio was beneficial to these efforts. The exhaust temperatures between our '66 Newport 383 2bbl and our '72 Newport 400 2bbl are significant. The '66 is much cooler, by comparison. Keeping the...

Interesting information. Thanks to both of you guys for Your mopar knowledge. Keep Truckin.

Both quarters done and in primer.

I'll politely disagree. 906's have a distinct flow advantage .300-.450" lift even in stock form. Many 516's are over 80cc. Some 906's can be 90cc, but some are 87-88. The CR becomes small.

My 2 cents, Here is the "decoded" fender tag from my 67 Coronet 440. I find pre 69 fender tag's a challenge but I got this info from a seemingly very knowledgeable 67 Charger owner. Hope this helps you. Line 1&2: Code w – 6 = Built to Canadian Specifications Line 3&4: Code X – 2 = Tinted...

The difference in the ports from 516 to 915/906 means nothing on a stock type driver car with a small camshaft. And the difference in compression ratio is real and not a benefit to a 1967 and older engine with pistons from a closed chamber head. I wouldn't switch to 906, larger exhaust valve...

Tail light from '57 Plymouth Nice shape, some slight weathering but hard to find $50 CAD Located Parksville, BC, Canada

Look great but where do the slides actually go? I ask because my heater temp control is hard to slide across. I have to grab it with vice grips. I tried lubing as much as I could but it didn't really help. Lubed the adjustment section that sits behind the glove box. Easy to find since I don't...

1966 large return hose 5/8" 1967 small return hose 11/32" between 5/16 and 3/8

70's blocks resurrect it for low mount ps pumps I think?