Search results for query: *

I have a 71 monaco with a 383/727. I can get a 68 chrysler marine 440 for a decent price. They rotate opposite direction apparently but was told you just need to replace the cam and distributor to make it normal. Never used one before. Does anyone have any experience or input on using this...

I pulled the trans off my 71 monaco to install a 2500 rpm stall converter on a 727 tranny. Found one one of the six mount bolts missing. Upon further diag. The diver side middle bolt was missing and busted off. I intend on replacing this engine from 383 to 440 eventually. should I bother...

my battery on my 71 monaco is not charging. Changed the alternator with tuff stuff 130 amp and tuff stuff voltage regulator. Still not charging. Checked continuity of the two field wires to the alternator to voltage regulator wires are good. Swapped batteries and ko positive result. Grounds are...

I put a cam in a 71 dodge 383 engine and now want to put a stall converter in. I ordered one from summit racing. It is a Hughes performance street master 24-25 2500 rpm stall. The guy at summit said it is compatible because the external balance is on the fly wheel. I thought chrysler balanced...

I'm putting a cam in a 71 383 engine and bought a summit timing gear set to replace the chain. The instructions suck. They are for chevy small and big block and big block chrysler. Does the 2 idle gear dog bone just float between the crank and cam gear? I dont see how its fastened down. Any...

Im putting a new harmonic balancer on my engine. It's originally a 71 dodge 383 2bbl so I think it's externally balanced engine. It currently has a balancer off a 77 chrysler 400 4bbl engine which should be external too. First are all those extetnal balancers weighted the same. My engine seems...

Does anybody here have extra 71 monaco hood dodge letters. Can't find them. Might weld the holes in.

71 monaco with remanned 383. Rebuilt 727 trans. Has 3.55 rear end gears in 8.75 sure grip. Msd mechanical advance distributor and ignition module. 2.5 dual exhaust with flownmaster mufflers. 1978 "high performance" 400 exhaust manifolds Edelbrock performer rpm intake manifold. Have 2...