Search results for query: *

Was there an performance OEM 2 barrel intake manifold for a "67" 318? I have a slightly modified 318 and want to use a 500cfm carb on it for various reasons. Here's the issue I reside in South Africa so parts for Mopar are extremely difficult to find so any help would be greatly appreciated.

Good day, so as I'm rebuilding my 318 la I see that the rocker arms are worn, so to replace what's the best way to go stamped rockers from Rockauto or are there better available, engine is mildly upgraded in performance. Please be specific as to what type and reasons as I understand that the...

Goodday so I'm needing advice on the K member removal. Is it possible/advisable to make a cross member stand with wheels and clamp it to the rear of the K member then lower compleat K member with the front wheels still attached? Reason then it's a complete unit and in my opinion easily to move...

Good day, I'm replacing my Conrod bearing shells but have noticed that they no longer have the notch cut for the oil to squirt up to the underside of the piston....is this correct? The bearing shells are Clevite. Does one need to machine in the small V cutout?

Good day all, yes it's been sometime since I posted due to health and a few other issues , however going forward I require help with my “67" 318 la engine upgrade. I've replaced the mains, big ends, piston wrist pin bushes and obtained some KB 167 0.030 oversize pistons. Now I'm looking for a...