Search results for query: *

I believe I am missing something in front of me. Rebuilt all window motors. All bench tested good in the regulators. Mounted in car and no movement. Getting 12.4 V on tan wire at switch., 12.29 on the leads going to the motor. Test ground (blk) at switch with probe, all good. Tested the...

68’ 300 convertible - I have checked the FSM for wiring and cannot see the source for the seats. Manual says it has a 30 amp circuit breaker in left side Cowel which is in the picture however only one. Manual also states PW, top and seats are off a circuit breaker. Is there only one for all...

I have this motor for a 68’ Chrysler which is inoperable. In disassembly I noticed the armature was stuck, however can move with pliers but very hard. Seems to be a bind at the end where this plate is holding the armature. Should the armature be able to be completely removed from this plate...

There is a recent post on ammeter bypass i have watched and read Daniel Sterns article on relays. I understand the wiring concept however get lost in the flow, and maybe that's wrong. I have a 68' 300 with an electric fan with two relays powered directly from the battery with a temp switch...

I have this motor that I took apart and cleaned all the parts. Didn’t work at all. Not sure if it was the hardened grease or electrical. Anyway put it back together snd it spins great in one direction. This metal points-like strip was at an angle not touching the contact. It works in the...

I am upgrading my 68’ 300 to tilt column with cruise. I’m just wanting to confirm how to install the cc lever. It appears I should turn the lever in first, then feed the wires through, however I am concerned about bending the wires at the base of the lever to the point of breaking the...

I installed the comp cams #2104 double roller timing chain set on my 440 and being like 40 years since rebuilding engines, I jumped the conclusion that the two circle dots have to match when installed. Well, this set, while it came with instructions that I must have not read, has two sets of...

Have the 67' Chrysler Service manual however, I am rebuilding a 68' Chrysler 300 convertible and starting to rewire under the dash and firewall connectors. I tried labeling the wires however the tape fell off. Have c-body wiring harnesses can compare to and three speed wiper motors and harness...