Search results for query: *

This is a OEM Big Block Crankshaft/Harmonic Balancer Bolt & Washer. It is original, not a china knockoff, and is in good condition. It came off of a 1969 440HP, but fits the 350,361,383,400,413,426w, and 440ci engines. $15.00. Local pickup, or buyer pays shipping.

This is a OEM Big Block Mopar Distributor Hold Down. It is original, not a china knockoff. It is in good condition, just could use a cleanup. $20.00. Local pickup, or buyer pays shipping

This is a pair of OEM Mopar Big Block Rocker Shafts, Bolts & Spacers. They are original, not china knockoffs. They came off of a 1968 440, but will work on many big block Mopar engines. They are in good condition, just could use a cleanup. $45.00. Local pickup, or buyer pays shipping.

This is a OEM Big Block Oil Pump Intermediate Shaft & Bushing. They are original, not china knockoffs, and are in good condition. They fit the 350, 361, 383, 400, 413, 426, and 440 engines. $30.00. Local pickup, or buyer pays shipping

This is a OEM 1960's, 70's Throttle Stud. It is original, not a china knockoff. It is for an auto trans, but can also be used with a stick. It is in good condition. $15.00. Local pickup, or buyer pays shipping.

This is a OEM Set Of 1968 & Later B Engine Pushrods. They fit the 1968 and later B engines. 361, 383, and 400 engines. They are original, not china knockoffs. They are in good condition, just need a cleanup. $20.00. Local pickup, or buyer pays shipping.

This is a OEM 1969 to 73 C-body starter relay. It is original not a china knockoff. It may also work on other years and models. $20.00. Local pickup, or buyer pays shipping.

This is a Used OEM Big Block Oil Pump #2203260. It is original not a china knockoff. It is in good condition, but could use a clean up. It has the red pressure spring. The four original attaching bolts are not shown in the pictures, but are included. $25.00. Local pickup, or buyer pays shipping.

This is an Assorted Lot of Big & Small Block Mopar Gaskets. They have been sitting in a parts drawer in my garage for many years, and I no longer have a use them. Maybe someone else can use them. $25.00. Local pickup, or buyer pays shipping.

These are OEM Single And Four Nipple Vacuum Ports. They Came off of big block Mopars, but may work on small blocks too. $15.00 for both. Local pickup, or buyer pays shipping.

This is a OEM Clutch Fork Return Spring. It is original, not a china knock off. It is about 5 3/4" long, and is in good condition. I believe it fits 1966-up B/E-body big and small block, and 1967-69 A-body big block, and may also work on other years and models. $10.00. Local pickup, or buyer...

This is a OEM Small Block Mopar Ignition Coil Bracket. It is original, not a china knockoff, and is in good condition, Just could use a cleanup. $15.00. Local pickup, or buyer pays shipping.

This is a set of OEM Mopar LA Small Block Cylinder Head Bolts. They are original, not china knockoffs. They are in good condition, just could use a cleanup. $45.00. Local pickup, or buyer pays shipping.

This is a Pair Of OEM Mopar 1962/63 413 Cylinder Heads #2206324. They are complete closed chamber heads w/HP red valve springs. They came off of a good running 300H 413 many years ago, but should probably be gone through before using, as they have been sitting on a shelf in my garage for many...

This is a OEM Big Block Crankshaft/Harmonic Balancer Bolt & Washer. It is original, not a china knockoff, and is in good condition. It came off of a 1969 440HP, but fits the 350,361,383,400,413,426w, and 440ci engines. $15.00. Local pickup, or buyer pays shipping.

This is an Assorted Lot Of Big Block Mopar Parts. They are original, not china knockoffs. $25.00. Local pickup, or buyer pays shipping.

This is a Set Of OEM 1967 & Earlier RB Engine Pushrods. They fit the 1958 to 1967 383RB, 413, 426w and 440 engines. They are original, not china knockoffs. They are in good condition, just need a cleanup. $20.00. Local pickup, or buyer pays shipping.

This is a 1965 to 74 Holley 1&2 BBL Choke Pull Off. It works good but could use a cleanup. $15.00. Local pickup or buyer pays shipping. Fits: CHRYSLER (8) 1970-74 DODGE (6, 8) 1965-74 DODGE TRUCK (6, 8) 1971-81 PLYMOUTH (6, 8) 1965-74 Holley 1920 1 bbl carburetors Holley 2210 2 bbl carburetors...

These are OEM Single And Four Nipple Vacuum Ports. They Came off of big block Mopars, but may work on small blocks too. $20.00 for both. Local pickup, or buyer pays shipping.

These are OEM 1958 To 63 Big Block Rocker Arm Assemblies. They appear to be in good condition and just need a good cleanup, but they don't belong to me so I can't vouch for them and am selling them for a friend's widow as is with no returns. $75.00. Local pickup, or buyer pays shipping.