1961 Chrysler Brake Booster Rebuild Kit

[Bucket]

Does anyone have a source for a rebuild kit for a 1961 Chrysler brake booster rebuild kit .
Mine is the Oval style Canister .
I have found a kit on Ebay but am wondering if there are other sources .
Cheers,
Greg

 

[darth_linux]

Not sure about this, but it’s worth a try. https://www.parts123.com/parts123/yb.dll?parta~partsort

 

[Fireflite56]

Andy Bernbaum: Power Brake Booster Rebuild Kit | 1957-1959 Mopar Cars | Andy Bernbaum Auto Parts

Harmon as mentioned above: https://www.parts123.com/parts123/y...~S78O0KYRDT12920012380e~Z5Z5Z5~Z5Z5Z50001029z

Power Brake Booster Exchange / Booster Dewey sells them as well, but someone I know just spent several months and a bunch of emails and phone calls trying to get one with very poor customer service and no rebuild kit in the end.

 

[darth_linux]

Andy Bernbaum: Power Brake Booster Rebuild Kit | 1957-1959 Mopar Cars | Andy Bernbaum Auto Parts

Harmon as mentioned above: https://www.parts123.com/parts123/y...~S78O0KYRDT12920012380e~Z5Z5Z5~Z5Z5Z50001029z

Power Brake Booster Exchange / Booster Dewey sells them as well, but someone I know just spent several months and a bunch of emails and phone calls trying to get one with very poor customer service and no rebuild kit in the end.

Since there has been some confusion in the past due to similar names, Power Brake Exchange (Power Brake Exchange - Rebuilts You Can Rely On Since 1959) is NOT the same company as Booster Dewey (Vacuum Brake Boosters | Power Brake Booster Exchange, Lynwood).

My booster is getting rebuilt at Exchange, located in San Jose, after hearing they did good service more quickly and at a better rate than the place in Lynnwood.

OP might look into getting it rebuilt rather than trying to find a kit and doing it yourself (unless you have the tools and experience).

 

[Bucket]

Thanks fellas , i am in Australia so sending it to the USA would be a problem and costly .
Cheers ,
Greg

 

[KevinW]

Thanks fellas , i am in Australia so sending it to the USA would be a problem and costly .
Cheers ,
Greg

I bought a kit from Andy Bernbaum 3 years ago, not cheap but correct.