WANTED 1967 Fury III Hood

[Deleted member 8761]

Hi, I am looking for a good rust- and dentfree hood. It must be a 67 hood, where the letters "PLYMOUTH" are mounted over the full front, not only to the side. This hood must be shipped to germany. Would be great if seller can arange this.

 

[FURYGT]

FYI, a '68 Fury hood will work but you would need to drill out the holes for the PLYMOUTH letters and fill in a hole or two from the emblem that they used on the '68's.

 

[Deleted member 8761]

Correct. Should not be a problem. Do You have a good one ?

 

[FURYGT]

Correct. Should not be a problem. Do You have a good one ?

I used to. Sadly, I sent at least one to a metal recycler last September just before I moved a long distance as nobody wanted it.

The problem is going to be the shipping. You need to find someone who is having a shipping container of parts sent over to Germany and then you need to find someone who will bring it to the shipping port. It is going to be expensive. I may know someone that has one but the problem would be finding someone to get it and finding a way to get it to Germany.

 

[Deleted member 8761]

Yes, I believe this will be the Problem. May be I have to find someone who can do the metaljob here in germany. Propably for the same money....