b00sted
New Member
Sorry did not see a trade forum over here like we have on the A body site. Yall are the masters on the old c bodies so I came here to see if I can get my dream car.
.030 440 forged pistons, 590 purple shaft, worked 85 heads with roller rockers. TM7 intake with 850 double pumper. No rusted holes in this car. Has line lock, built727 with manual reverse valve bodym J convertor 4:56 gearsl, spiool with yukon axles, long wheel studs 8 3/4 weld wheels with a 28X10.50W on the back under the car with a full caltrac setup. 90/10 front with dual adjustable rancho shocks on rear. Car has 2 glass seats in front with a 6 point roll bar. Runs 7.0 index all day long.
I am looking to get a 57-62 Chrysler or Chevrolet project. Must be mostly complete. I am willing to sell the car as is for $16,000 or repainted in B5 base clear for $18,000. Sorry for the bad photos but better ones are coming. Car is ready to race now.
.030 440 forged pistons, 590 purple shaft, worked 85 heads with roller rockers. TM7 intake with 850 double pumper. No rusted holes in this car. Has line lock, built727 with manual reverse valve bodym J convertor 4:56 gearsl, spiool with yukon axles, long wheel studs 8 3/4 weld wheels with a 28X10.50W on the back under the car with a full caltrac setup. 90/10 front with dual adjustable rancho shocks on rear. Car has 2 glass seats in front with a 6 point roll bar. Runs 7.0 index all day long.
I am looking to get a 57-62 Chrysler or Chevrolet project. Must be mostly complete. I am willing to sell the car as is for $16,000 or repainted in B5 base clear for $18,000. Sorry for the bad photos but better ones are coming. Car is ready to race now.
