WANTED Exhaust Hanger Accessories

[73Coupe]

Looking for one of each of these (see photos).

1. Dual exhaust LH side hanger bracket that mounts to the body. The hanger mounts to this. see photo below.
2. Wire clamp for hanger (need two - circled in photo). I already have the hangers.

I was going to make them but would save me time if someone had some spares laying around....

3. Also, need a rear tailpipe hanger at the tip (one).

Car: '71 New Yorker, so any fuselage era parts should work.

Thanks...

1. Tailpipe hanger BRACKET (Left only)

2. Tail pipe hanger (front) CLAMP only (circled below)

3. Tail pipe Hanger (Rear)

 

[marty mopar]

year and model of car?

 

[73Coupe]

year and model of car?

Oh yeah....duh. Thx, edited above.

 

[saforwardlook]

Oh yeah....duh. Thx, edited above.

Hey John, I wrote about these some time ago and they are available at Accurate Exhaust Systems new. They aren't cheap but then again a car as extraordinary as yours deserves the best!

C Body Hangers, muffler and tail pipe

I hope they are still available so check with them directly.

 

[73Coupe]

Hey John, I wrote about these some time ago and they are available at Accurate Exhaust Systems new. They aren't cheap but then again a car as extraordinary as yours deserves the best!

http://[URL]https://www.accurateltd.com/C-Body-Hangers-muffler-and-tail-pipe_c_96.html

[/URL]

I hope they are still available so check with them directly.

Hi Steve, Thanks but I only need the wire clamp that screws onto the bottom of these, clamping the pipe to the hanger. I already have good originals of the main parts.

 

[Davea Lux]

Hi Steve, Thanks but I only need the wire clamp that screws onto the bottom of these, clamping the pipe to the hanger. I already have good originals of the main parts.

I have one from a '69 Polara, if that will work PM me.

Dave

 

[73Coupe]

I have one from a '69 Polara, if that will work PM me.

Dave

Thanks Dave, but looks like I already have a lead on these clamps.

 

[MrMoparCHP]

Keep in mind those clamps are in different sizes.
The 69 Polara (w/HP440) had large pipes.
Even after repairing this one it was bigger.

Alan