No vanity interior lights on my '66 300

Zymurgy

Old Man with a Hat
FCBO Gold Member
Joined
Sep 14, 2012
Messages
6,642
Reaction score
7,489
Location
London, Ohio
I can't seem to find my service manual CD. I was driving Goldie home after seeing the PO. I had not installed the console yet and one of the side light sockets, with no bulb installed, shorted out on some metal around the shifter and threw some sparks. I figured I might have burnt a fuse.

I didn't check the lights until today and had no lights at any socket. I checked the fuses under the dash on the driver's side, but found none burnt. Are there any other fuses that I am over looking for the lights?
 
I would check for a melted or burndt wire. Start closest to the source of the initial sparking and work back to fusebox.
 
I guess I probably shouldn't have install the console yet. I debated about putting it in before I resolved the electrical issue. The good part is I can now do it pretty fast since I have already done it, and not trying to remember what I did a year ago.
 
Back
Top