Pulsating brake oroblem

[polara66hardtop]

yes, good news. maybe heading in the right direction.

 

[68Nwprt]

Hot spots from them getting hot and making them go back out of round and with a single circuit system one slight oor. oposite another oor would be shoving fluid back and forth I would have them checked for roundness again (trued) maybe by a different shop. my 2 cents

When I did front brakes on my wife's truck, I had the rotors turned to clean them up. At road test I noticed pulse when breaking. One rotor checked out of round by .005 of an inch. The other was within .001. Had the one @ .005 re-cut and problem was solved.

 

[70bigblockdodge]

I got a rotor brand new for my sisters car years ago that was warped/not true car did not pulse with worn out pads put new rotors and pads car started pulsing wtf, like I said brand new rotor not true, stranger things happen.

 

[polara66hardtop]

These so called new rotors are an Inferior product. I had to turn them, brand new in order to work properly. I also had to turn some new 11x3 drums, this stuff today is not up to OEM stuff, if you could find it.

 

[70bigblockdodge]

Oh I knew where my problem was right away. The other joke is the rotors have high iron content to work with ceramic pads haha b.s. they are just crappy steel period.

 

[baker53]

Just ordered a pair of drums with hubs that hopefully, will be here in a week or so. After installation, I'll update on the pulsation issue.