WANTED WTB: 1966 Newport lower trim, 2-door

Status
Not open for further replies.

Mike66Chryslers

Senior Member
Joined
Apr 28, 2012
Messages
1,326
Reaction score
1,793
Location
Ontario, Canada
Feedback: 0 / 0 / 0
Contact seller
I am looking for lower trim for 1966 Chrysler Newport/Windsor 2-door hardtop or convertible. I especially need good trim for both doors.

Doors upper = 2807142, 2807143
Doors lower = 2807146, 2807147
Partsvoice doesn't turn up anything for these four part numbers.

I do have an NOS piece for the drivers rear quarter lower piece which is missing in the picture. :) I also have good used front-fender spears already.

Thanks

IMG_0895_trim_wanted.jpg
 
I've previously found that Rearcounter gives me the same results as Partsvoice. Rearcounter also hides the actual name of the seller and wants me to contact the seller through their web form. Again in this case it told me the same sellers I found through Partsvoice. Thanks though.

You are Marty from Arizona Parts right? I bought a couple of these trim pieces off you when I was restoring my other 66 Chrysler. Thanks again! :)
 
I am looking for lower trim for 1966 Chrysler Newport/Windsor 2-door hardtop or convertible. I especially need good trim for both doors.

Doors upper = 2807142, 2807143
Doors lower = 2807146, 2807147
Partsvoice doesn't turn up anything for these four part numbers.

I do have an NOS piece for the drivers rear quarter lower piece which is missing in the picture. :) I also have good used front-fender spears already.

Thanks

View attachment 430711
I do have part 2807217 L 1/4 peak and 2807221 L 1/4 bumper outline if needed
 
If anyone has a stash of this trim but doesn't know exactly what they've got, I took length measurements. If there are 2 measurements, it's because the upper and lower pieces are different lengths.
doors 47"
qtr. panel front: 25-3/4", 25-1/2"
skirt: 35", 36-1/2"
qtr. panel rear: 32-5/8", 31-3/4"
 
Status
Not open for further replies.
Back
Top