hey everyone...long time lurker, infrequent poster...but thanks for the good info when I do post!
So I had my 300 vert on on the road the other day and saw intermittent brake light flash on/off. Re-bled the brakes and finally traced the problem to a cracked in the right front brake line.
Seems simple to replace, but the part i sourced from summit racing was no where near the length and bends needed. So...anyone know of a good source for this part or is it a diy project?
The local napa parts shop does NOT have the length needed so it looked like i would have to start with their longest line, 5 footer and bend it till i needed to join to a second section. The counter guy said this is doable, with a connector. Has anyone done this before as I thought these lines have to be one piece?
Any advice or thoughts would be welcome!
thanks,
Dave
So I had my 300 vert on on the road the other day and saw intermittent brake light flash on/off. Re-bled the brakes and finally traced the problem to a cracked in the right front brake line.
Seems simple to replace, but the part i sourced from summit racing was no where near the length and bends needed. So...anyone know of a good source for this part or is it a diy project?
The local napa parts shop does NOT have the length needed so it looked like i would have to start with their longest line, 5 footer and bend it till i needed to join to a second section. The counter guy said this is doable, with a connector. Has anyone done this before as I thought these lines have to be one piece?
Any advice or thoughts would be welcome!
thanks,
Dave