WANTED Cruise Control setup for 1968 to maybe 69-70' with the round resume control

[sprice]

If anybody has a a setup, would be happy to look at it ASAP. Thanks,

Shawn

 

[Samplingman]

If anybody has a a setup, would be happy to look at it ASAP. Thanks,

Shawn

I still have the cruise lever from this column, and the activator from the brake pedal out of a '69 300. PM if you are interested.

http://www.forcbodiesonly.com/mopar...th-Cruise-Speed-Control-Lever-and-Wiring-1969

http://www.forcbodiesonly.com/mopar...tch-for-Brake-Pedal-1969-Chrysler-P-N-2926676

 

[sprice]

Thanks Samplingman for the information. I have a tilt setup current so don't think this will work but will keep it in mind in case i run dry.

 

[1973gtx]

just scraping a 68 300, everything is still on the fender for cruise,the resume control on the wheel is broken,

 

[sprice]

Hi, thanks for the note. From what I have read the brake switch is different in cruise units, would that be available and are the front turn signal lenses and houses in good shape? Let me know what's available and what you might need for them. Thank you.

Shawn

just scraping a 68 300, everything is still on the fender for cruise,the resume control on the wheel is broken,

 

[1973gtx]

sent PM

 

[1973gtx]

 

[sprice]

hello,

Thanks for your reply. the lights look better than i have so i'm interested. I should probably take everything thats connected for the cruise setup. I'm not sure what will be needed. even if it doesnt work, that way i can i woukd know whats needed. What would you need for the lights and the cruise parts? Not in a rush as its snowy here now. Thank you.

shawn

 

[1973gtx]

PM sent to Sprice