James Romano
Well-Known Member
Hi. I'm swapping out my single to a dual MC. I have everything ready and am mocking it up. First thing I noticed is my "new" booster is totally different than my original which is toast.
Napa part number 54-73520 give the correct picture on the website, but the one I have on my bench is vastly different in shape and check valve design. There are no padded gaskets, nothing.
Is this ok? Can I use this booster? Why does it have a 3 port check valve? Bolt patterns match ok.
I'm using an MC from a 67 Mopar. Here are the pics. Not really sure what I have here and not sure if this will work. Any help/advice would be great. Thanks.
JR
Napa part number 54-73520 give the correct picture on the website, but the one I have on my bench is vastly different in shape and check valve design. There are no padded gaskets, nothing.
Is this ok? Can I use this booster? Why does it have a 3 port check valve? Bolt patterns match ok.
I'm using an MC from a 67 Mopar. Here are the pics. Not really sure what I have here and not sure if this will work. Any help/advice would be great. Thanks.
JR