WANTED 1964 Power Steering Box

Status
Not open for further replies.

mikedrini

Well-Known Member
Joined
Oct 9, 2017
Messages
701
Reaction score
663
Location
Center Barnstead, NH
Feedback: 5 / 0 / 0
Contact seller
I am looking for this style of power steering box. It bolts to the inner frame rail, rather than on the cross member (such as the more popular models beginning in 1965). Anyone have one in decent shape?

Shipping to 03225

IMG_20200215_153751326.jpg
 
I have several from 1964 Chryslers If you can use one of those.
Do you need just the sector or the whole shebang??
Located in eastern iowa
 
I have several from 1964 Chryslers If you can use one of those.
Do you need just the sector or the whole shebang??
Located in eastern iowa

Thanks, if it's the one pictured above that attaches to the inner frame rail, yes, that would be great. I am looking for the gearbox primarily unless you have the steering shaft too. I have the shaft housing and the pitman arm. I am actually heading out west tomorrow morning driving through Ohio, Illinois and up to Milwaukee. Where are you located in Iowa?
 
A little out of the way for you
35 miles west of Dubuque, IA on US hwy 20
I have what you pictured w/o the tube and shaft the wheel fastens to,
Several to choose from.
I'll go snap a picture.
What are you working on??
 
Yeah, I can see if I can swing it. I am rebuilding my 64 New Yorker steering gearbox and mainly I need the valve body attached to the gearbox by two bolts that the hose connects to.
 
The one on the right in the last picture, looks like the one I have. You wouldn't happen to have (as well as have pictures of) rear driver side quarter panel or rear chrome bumper would you?
Parted several NY'ers over the years.
Have engine and tranny from one yet, (condition unknown) sitting under my bench.
I have a rear bumper core that would need re-plated, pretty straight, have a bumper guard w/pad, driver quality. A few WOM's some might be from NY'ers, most from 300's though.

A few photo's here Untitled
 
Thanks Dave. I am heading out on the road from New Hampshire tomorrow morning, I will let you know if I can make it out your way by Friday.
 
Parted several NY'ers over the years.
Have engine and tranny from one yet, (condition unknown) sitting under my bench.
I have a rear bumper core that would need re-plated, pretty straight, have a bumper guard w/pad, driver quality. A few WOM's some might be from NY'ers, most from 300's though.

A few photo's here Untitled
Wow!
Sounds like quite a road trip!
If you really want either or both of those sectors, I'd be glad to meet you in say like Galena if it will help any
 
Apparently I have to help my in-laws move more crap than I planned on, so I won't be able to make it over to Iowa, thanks for the offer and making the effort
though.
 
Status
Not open for further replies.
Back
Top