1970 Plymouth Sport Fury Coupe

Thanks for checking. Much appreciated.

Devin Duke
McMinnville OR
 
Pic of the grille assy, it is in very good condition and simply needs to be repainted, the motor turns freely but i haven't operated it electrically. I wont do that as you cant bench test these out of the car as it will damage them internally. Also the crossbar rod is missing but the clips to hold it in are still there. The mount brackets are included. The under dash wiring hardness is included as it has the relay fitted to it. Also the headlight wiring harness is there too which has the headlight motor wiring in it. I will also include the headlight buckets as they are shallower than non sport Fury cars. A customer is looking at this and if they pass on it, I will put it up for sale to others.

DSCF4808.jpg
 
This is great Wollfen that your doing this to keep these old gals going.
 
Any luck on the front and side markers (you photoed some but not the fronts) and the interior door trim?
 
Any luck on the front and side markers (you photoed some but not the fronts) and the interior door trim?
I will be removing the front turn signal housings tomorrow as well as the side markers, I will post pics soon.
 
I will be removing the front turn signal housings tomorrow as well as the side markers, I will post pics soon.
cool. Don't forget the chalky, crumble in your hands trailing edge door trim :)
 
cool. Don't forget the chalky, crumble in your hands trailing edge door trim :)
Raining today so I'm waiting for a break in the weather to get more parts off. I checked for the trailing edge inner doorway trim and they are already gone, taken by the previous owner as are the rear panels and pillar covers.
 
@furious70 Front side markers in good condition, I would like $50 for the pair plus shipping, the front turn signal indicators are trash, check the pic.
DSCF4819.jpg

DSCF4820.jpg
 
@Shaker19981 @1970cat
Wheel arch molds are drivers condition, check the pics, some minor dents as pictured and a couple of the mount holes show damage. They will need to be cleaned up but should look pretty good once a bit of TLC is put into them. I would like $40 plus shipping for the set.

DSCF4821.jpg
DSCF4822.jpg
DSCF4823.jpg
DSCF4824.jpg
DSCF4825.jpg
DSCF4826.jpg
DSCF4827.jpg
 
@Shaker19981 @furious70
Here are the rocker moldings, the drivers side has a dent below the drivers door, there are two detail pics, below the first pic. The passenger side shows a scratch in the surface but no dent, the last pic shows it. Other than that they are straight and no splits etc. I would like $80 plus shipping, shipping will have a ten dollar surcharge for the conduit pipe I will buy to ship the rockers in.

DSCF4839.jpg
DSCF4835.jpg
DSCF4836.jpg
DSCF4840.jpg
 
Hard to tell, how corroded are the rockers aside from dents? I'm more interested in the pass side
Pm on the lens
Your inbox is full. Let's put the 2 sets of lenses 'in the cart' for now while the rockers are discussed
 
Hard to tell, how corroded are the rockers aside from dents? I'm more interested in the pass side
Pm on the lens
Your inbox is full. Let's put the 2 sets of lenses 'in the cart' for now while the rockers are discussed
Rockers are corrosion free on the back and only show a little corrosion stain on the front and rear edges at the bottom and around a couple of holes but it hasn't eaten the metal away. I will clear me inbox a bit.
 
@Shaker19981 @1970cat
Wheel arch molds are drivers condition, check the pics, some minor dents as pictured and a couple of the mount holes show damage. They will need to be cleaned up but should look pretty good once a bit of TLC is put into them. I would like $40 plus shipping for the set.

View attachment 386702 View attachment 386703 View attachment 386704 View attachment 386705 View attachment 386706 View attachment 386707 View attachment 386708
unfortunately, they are in about the same condition as mine. thanks for checking and the pics though.
 
Back
Top