Recent content by bildog

If you're still looking I have the passenger set, 2 for the seat back and 1 for the seat bottom trim. This is the trim only with all the attachment posts in place.

I just rebuilt my Carter carb and used Krud Kutter Pro cleaner and degreaser. It's 14.99 a gallon at Northern tools. I rigged up an "ultrasonic" washer using a power hand sander and some plastic tubs and pitcher to vibrate the parts clean and it worked great! I put the sander in a plastic...

This will seem way too easy but works great. Clean the loose rust off, don't need to attack it, and spray a coat of PB Blaster graphite dry lubricant on the manifold, hot or cold. Looks as good as the Eastwood and VHT but is much easier. If the rust starts to show through again, just shoot...

If you are in need of a pair of rams that were tested and show no leakage and a set of hoses/lines that also are leak free, let me know as I will sell them. They came off my 69 300.

I sent you a message re:69 300 rear bumper. Here’s a photo to help. Thanks

P hotos of the window motors from 60's Mopars and late 70's - early 80's.

I believe the power window motors can switch side to side but wing vent motors are specific to each side. Also just FYI I have found that newer, like 80s and early 90s New Yorkers with the almost vertical back window and smaller motors will also work with the correct plugs spliced in the line..

Looking at the last photo, is there a part number on this and do you still have it. Looks like part of auto temp system. Let me know price etc and shipping. Thanks

Hey David, did you ever find a source for these!

I had SMS auto fabrics rebuild my door panels. Original owner had installed 3 speakers in each door and I wanted them gone. You send them your old panels they remake them like original and return them. It did take months but the wait was well worth it. They shipped them when promised too...

How about just screwing the mirror into the holder. Mine was loose and this tightened it up for me. Just put your fingers against the mirror and twist to the right. Hope this helps.

Do you have a rear bumper for a 69 300 in good condition?

It is the same grill all the way back to 1965 for Chryslers, Dodge and Plymouth. I did a second production run and my fabricator upped the price of production. I now sell them for $75 and I include priority shipping, usually 2 day, in the U.S. I have sent lots of them around the world. I'm...

Can you send more photos of the dash/radio bezel especially the left side of the dash. My dash was cut by original owner to replace the radio. I would need the radio in the dash too. Thanks