Recent content by Bryon Mason

The rest of the pics...

It's been awhile since I've updated anyone on the progress of my 66'. Still have some work to do, need to have the interior done (I'm not even going to attempt that) but everything else you see I've completed in my backyard. Part 1.

Here's a little reel of the progress on my 66'. Taking longer than I thought but the more I put into it the more I love it..

Looking for recommendations on a fan shroud. Car runs fine but tends to get hot in stop and go traffic. Currently has the original 4 blade fan. Also considering a pusher fan.

I just went through this with mine, pulled the oil sending unit, ran a drill in the pump, was flowing oil but no pressure. Pulled the valve covers and i had a broken rocker, pulled the intake and the lifter was out as well. New rockers from 440 source fixed the problem. Made a video of me and...

short Video of me and my son getting her running again.

440 source

She's back in business, thanks to those that were helpful with their advice.

Mainly because I'd rather ask the opinions of others who may have bought some, ran them, and deemed them to be good. No need to be a dick. Thanks for taking time away from beating your wife and kicking your dog to post on my thread.

Well I found the problem. I want to replace them all. Wheres a good place to buy a set from that won't break the bank...

I ran the break in oil for the first 500 miles or so, then changed the oil. I've now changed the oil and filter again since the pressure drop..

Original dipstick, i had the same problem with losing pressure, neutral. Couple whaps of the throttle and pressure came back. I pulled the distributor and the oil pump drive shaft. Run a hex rod to the drill, pulled the oil sending pressure unit, it pumps oil to the unit at the back of the...

Rebuilt engine, maybe 2k miles on it. Would randomly lose oil pressure when i Would "goose" the pedal at low RPM under 15mph. Recently while taking a corner , maybe 20 MPH, oil pressure dropped and never recovered. I shut the car down right away and had it towed home. So far I've pulled the...

Does anyone know the correct pickup tube for a 1966 chrysler 300, 383 stock pan.

Thank you, still some work to do. Thats going to be the color of the car when done.