Rick_S
Hi C Body Bob. I noticed you may have a washer reservoir available for a 70 Newport from previous post. Let me know what you have. I also have a non-related question regarding the steering box input shaft seal. Is it possible to remove the 4 ''retainer ring with a spanner wrench without taking the whole steering box out of the car? Thanks for any info you can pass my way.

hello c body bob my name is michael and i am looking for the trim for a 1969 300 convertible the trim and retainers for the 1/4 panels and dutchman panels chrome with a black stripe in the center

HELLO THERE. I AM LOOKING FOR A FRONT SUBFRAME FOR MY 1970 CHRYLER NEWPORT CONVERTIBLE. ANY IDEAS?

Hi C Body Bob, I was looking at the post about Ried Whisnant pro stock duster and was wondering if there was any updates on the progress. I am friends with Tom Wallace that was Reid's mechanic and engine builder for that car after Bird left. I have the original keystone wheels (The very ones in the picture posted) that were on that car if the owner is interested.

HiBob I was looking to purchase a 1968 plastic gauge cluster mine is a column shift has a clock. I am actually looking for one that is in working order. Thank you Bob I look forward to hearing from you sincerely Frank Beaury {440 sport fury

Hello fellow C-Body brother my 1968 Dodge Polara Coupe is finished after 15 years and headed to body and paint. I have a 1968 Monaco also that was restored to a daily driver. I always hated the gas filler neck behind the licence plate I'm thinking of swapping to the 1970 Dodge Charger flip style gas cap with new tank and hardware!Any suggestions on this conversion without making this a Johnny Salami Hack Job

I was wondering if you ever sold any complete cars with titles? Something that doesn't have to run but could with maybe a drivetrain swap and a few other things like brakes/minor things. 2 or 4 door, nothing special or rare, etc. Thank you.

Hello Bob

Hi Bob, I have Just joined and am located in the UK.
Toys = 1967 Newport Convertible. 1968 New Yorker 4 door Sedan, 1968 300 Convertible all in bits
As your profile shows a Richard Petty set of wheels and it appears you are located in North Carolina you may be the man for some advice as I have booked to attend the Bank of America raceway at Charlotte in this coming October. .

Looking for the lower quarter panels for a 67 Newport. I have the crome but the panels have rusted out of mine. Anyone parting out a 67/68 Newport

Hi Bob. I have a 1972 Fury II Police sedan that I am restoring. I'm looking for the rubber body mounts that attached it to the frame. I've looked everywhere but cant seem to find them. Can you help??

My ship to address is John Larocca 71 Federal St. Bridgeport Connecticut 06606. When you have time let me know what the total is with shipping and your paypal address. Thanks John.

where is this junkyard? is it open to the public? info?
Thanks,
Tom Denkler

I have them for a 71 300 two door in brown

hi do you still hve the 300 1970 doorpanels left?

I am looking for an interior piece, it mounts under the steering wheel and mounts the vent levers that controls the floor vents. I have a 67 fury III

Looking for full wiper arm assembly with blades from the 68 Fury for my 68 Monaco. Would need shipping to Ontario Canada L3M1B2. Thanks. Fred

Hi Bob! I saw that you are shipping containers to Sweden. I live in the southern parts of sweden I'm looking for a set of Magnum 500 for my -71 300,
two 7x15" in the front and two 8x15" in the back. These can be bought for 160 USD at Summit but how much would it cost me with shipping and tax.

Thanks /Ola

Where you looking for some info the Trader still .?

I will take the bumper for sure if you still have it available. Let me know the total amount and I will send a paypal payment to you. In no hurry for it, thanks John. I am on Facebook also. John Larocca.