Recent content by fury69

ok... you are right ... face some more facts. before i did al that, the engine was running well, but not dense (left head leaked a lot of oil (just outside)) so, i did all the new stuff. (heads, cam, rods, intake, msd.. ,.... ) ... after that the car actually runs fine ... so i drove out to the...

sorry to disappoint you guys (and my selfe :( ) the locating dowels of the intake manifold are already removed (i did that whit the new edelbrock manifold). and the front and end seals seams to be fine ....

New idea: i got the wrong oil. They sell me 5w30 instead of 10w40. Could that be a issue??

i did that. as i say from beginning is in ALL cylinders ...

no more idea where to looking at .... next step: install the original head again :(((

thanks for your answers. meanwhile i assembled the engine again .... put rtv silicon on all the intake-chambers (intake side and head side) --> still the same:( but i was able to run the engine again and get the oilpressure and compression. Oilpressure looks fine.... the compression is...

the valve shaft seals are fine (believe me). -> but they work just like a umbrella(right?!) which take me back to my "too much oil pressure issue". if there is to much oil pressure the "hats"(as we use to name the ValveShaftSeals) will stand in a puddle of oil which is too much for that umbrella...

@cantflip (sry almost forgot the pics ;) )

thx for your help guys. sorry for long time no answer. the valve guide seals was an issue (but why should they leaking all the same??). anyway. i removed the heads, free the valves from the springs just to see that the «hats» was allright. in that same turn we did a «paper print» between the...

thanx fot your answer. there is no pcv valve installed at this time. both of the valve covers are open, and the pcv port on the carburetor ist closed.

Hi Dear Mopar Friends I Did a lot of Changes on my 318. Replace the Cylinderheads with Edelbrock 60775 and did several other Changes and replacements (new compcam camshaft, new lifters, new pushrods, new Oilpump …and so on). After the First start actually the Engine starts great runs and...