Hi all,
Not sure if this is common knowledge but thought I would share since I didn't know and have not seen this posted about yet. USCT is in the process of making subframe connectors spring relocators and minitubs for our C-body's! John went on to say they are also working on Gen3 hemi swap...
I can confirm that the C-Body rotors and calipers are slightly larger. I have a B body caliper of the same type and it will bolt up but the extra thickness of the rotor does not leave enough room for the break pads. The part numbers for the larger C-Body calipers at AutoZone are C509 and C508...
Hello all,
I'm looking for a set of pin type single piston c body brake calipers for my disc brake conversion. I purchased a set of spindles and brackets from a 1970 Fury and have been able to get everything needed other that the calipers. Thanks!
"The big Plymouths were shorter than the dodge/Chrysler C body" Were you referring to the springs being longer in the Dodges or the wheel base only. I would love to get a set of the B body springs if they are the same.
Thanks,
I'm looking for the lens and trim ring for the speedometer/gas gauge for my 66 Polara. The previous owner tried to pull it from the front and busted mounts and the lens. If you have parts or know of any please let me know. Thanks! :)