Recent content by MoJo

  1. M

    Fuel gauge

    John, Thanks for contributing, I haven't been able to get back to this issue for the last 3 weeks, but am hoping to look at it soon. To clarify your statements, are you recommending against a solid state voltage limiter for the fuel gauge? I understand not wanting high current flowing...
  2. M

    Fuel gauge

    Big John, The gauge reads past empty and never moves regardless of the amount of gas in the tank. The 31 ohms reading was with about 1/2 full tank. I just refilled the tank and will get a new reading to see if it changes and I'm picking up a potentiometer today to test the gauge function and...
  3. M

    Fuel gauge

    Big John, I saw those ohm reading you posted in another thread and thinking is with a reading of 31 ohms, the gauge should show some movement. If the ohm meter showed 100 or more ohms, then I could understand the gauge reading. Remember, when I ground the wire, the gauge swings to full so I...
  4. M

    Fuel gauge

    Thanks for the suggestions. My confusion is the ohm reading vs the gauge indication. I think i'll try another sending unit or possibly a 100 ohm potentiometer to test the gauge function.
  5. M

    Fuel gauge

    Before posting, I always search the forums for suggestions to help resolve any issues on my 1966 300. I followed all the posted suggestion and still cannot figure out why the fuel gauge is not working. In any event, I trying to troubleshoot why my fuel gauge reads empty all the time. Below...
  6. M

    Power Steering Valve Body leaking

    Thanks for the input, definetly useful information. I was able to determine the problem and wanted to update this thread in case anyone else has this issue. The first picture below shows the valve assembly when I went to install it. As this was my first time, I wasn't aware that the valve...
  7. M

    Power Steering Valve Body leaking

    Hoping someone can help with the following issue. This is my first post, so bear with me. I have a 1966 Chrysler 300 4-door with power steering. Noticed a power steering leak was coming from the valve body on top of the steering box. I researched the issue and decided to replace the o-rings...
  8. M

    Welcome MoJo to FCBO!

    Recent proud 2nd owner of a all original 1966 Chrysler 300 survivor Location: South Louisiana
Back
Top