Search results for query: *

Awesome website I never knew about and found the code for tourquise interior in 2 seconds thanks for the info

What section of the build sheet says the option code

Don’t have a sample to send them but do have the original build sheet I found under one of the seats

im looking at putting my interior in my car back together when I tore it out the carpet and head liner were horrible. Does anyone know where I can find the color code so I can get the right blue interior for my 1965 sport fury coupe

Awesome thanks

Hey dart4forte do you know what your part number was? Can’t seem to find them.

Where did you get the new motors from? And was it a major pain? But sadly no I don’t have any spare parts just all original lol

Ok so work got busy and just now got time back to the car. I sprayed penetrating oil on all the tracks and boom the passenger and rear driver windows work awesome now. But my driver window will not move. I have good voltage at the plug going into the regulator but when I hit the switch all I...

Do autozone or car parts stores carry that connector hate to have to order a .50 cent connector lol

Well I found the sending unit for temp. Literally bolted right under the ac compressor I’m going to try and clean the wire and unit connector and see if that works really don’t want to remove the compressor. Hoping changing this horrible connector which failed the ground test will work.

Ok tested the wire again and no oil came on but gauge started to slowly move. And part looks dead on the one I ordered. Here’s a pic of the engine I have the 383 v8. I looked where your pic says it is and didn’t see anything. And I traced the wire according to the service diagram and pretty sure...

Hmm I’ll have to look again I grounded the wire to the one in picture and temp gauge was moving maybe I messed something up

Been going through all the electrical on the car and now I’m on the windows. Any tips or tricks taking them apart or cleaning the motors or regulators so I don’t end up replacing a motor that was only seized from grime

Well ordered a new one now that gauges are working time to move onto getting the windows going

Is this the sending unit for temperature

So I got the right but to fit the fuel sending unit and boom went up and stopped at about half a tank which is about right for the amount I’ve put in. And since the temp worked when I grounded it guess I have to find the temp gauge sensor on the block and see if it’s working properly

Ok finally got some time this morning in the garage. Im number 1 for my heating and cooling company so been busy and no time to test gauges with the weather turning cold. I grounded both the temp and fuel at the back of the gauge and both needles moved to full when I turned the key to on.

Isn’t that behind my fuel gauge do I have to drill out the rivets to get to it

Ok I have the gauge cluster out and pulled completely apart tested continuity between all point on the gauges and shows I have it between all points. I have good 12 volts coming into car at the alternator gauge lugs on back of cluster. So next step?

Ok so I pulled the gauge cluster for the temp, fuel, and battery loose still in car I put my test light and grounded fuel and alternator gauage and got good blinks from my test light. So I’m thinking I have a bad temperature gauge and need to work on a good ground for the fuel sending unit. I...