Search results for query: Lug nuts

Includes caps you see on the wheels and many extra caps. Also includes NOS center cap stickers and NOS lug nuts. $695., picked up from Utica, Michigan 48317. Or, I'll drop off at the local UPS if you set up the boxing and shipping. Or have a friend pick them up for you. Paypal ok. PM please...

I've bought a few sets from this vendor. Decent quality and the plating has lasted. Have to watch with any replacement lug nuts that hex is often a little larger than the stock nuts. Just gotta carry a "4 way" or a breaker bar/socket and not depend on the jack handle to fit. Items for sale...

I once bought a 68 Fury that someone put the finned drum on the right side. The lug nuts only caught half the thread. I promptly got the correct drum. If you use spacers you may have the same effect.

...or whatever 5. Known issues, e.g., interference with suspension parts, body parts, etc 6. Known adaptations, e.g, needed air shocks, special lug nuts, spacers, moved leafs, etc Thanks again for your help. My summary observations of the 100 posts above, what I saw the MOST OFTEN on this...

I'm waiting on a correct appearing lug nut to be delivered.

Thank you both. Great to know that 92 octane will probably work just fine. I suppose I could also just keep a case of octane booster in the trunk. That TECH PAGE is an incredible resource, thanks for the link @Big_John Yes - the engine was a transplant. - The owner said he was told the engine...

Don't forget the Lefty Tightly and Righty Loosey lug nuts if you replace them.

...these. The center hole on Ford wheels has always been slightly smaller than Chrysler. Sometimes you can carefully draw them on with the lug nuts and it will expand the hole to the proper size, and other times you need to run a die grinder around the hole a few times to open it up a bit. Jeff

I purchased my 65 Chrysler with two of these wheels on the back and two in the trunk as they were missing their lug nuts. anyone know the manufacturer of these wheels and what kind of lug nuts setup it is? would like to use the full set if I can find the lug nuts for the front. I know there a...

...black ones). I have cracked many a chrome socket on an impact gun. Might as well get the deep sockets, they're useful for double duty on lug nuts. DON'T use them for motor reassembly, you can't dial in torque on a gun, either electric or air powered. If you don't already have one, for head...

No, just make sure you get the correct lug nuts for the rims, there are many different types

...studs work in the rotor. A friend has a Bridgeport and lathe, the studs where from my 68- a-100 that I changed to right hands. He had to turn them down slightly on the head and shank and then re knurled them. Only about a 1mm short thru the rotor, so that should not be a problem with the lug...

Thanks for the reply. I measured the front drum and they appear to be 3". The brake linings look okay and the wheel cylinders are not leaking, The car has been sitting in the garage for a long time and the master cylinder went dry so I'm going to try some new fluid and a brake bleed. If the...

...against me) and those type of wheels were always a problem. As stated earlier, the back side doesn't locate the wheel on the car, it is the lug nuts and studs. Many shops will simply use the cone on the front of the wheel, which is just a hole for the center cap, not the center of the wheel...

Ok so they say you can't use a torque wrench. Now I can't property tighten my lug nuts. When my wheel comes off and kills someone can I hold the city responsible?

The way I like to do this is loosen your rear lug nuts first while the car is on the ground, then jack up the rear under the rear axle pumpkin high enough to put 2 jack stands underneath each side of the frame rails just in front of the rear wheels. Then once the jack stands are in place lower...

I like these short ones for use on the road wheels. Lug Nuts Bulge Acorn 1/2" Lugs 20 GM Ford Solid Short | eBay I've bought a few sets from this ebay seller over the years. One requirement is that you don't have longer than stock wheel studs on your car. Jeff

And this is only the beginning... :lol:

...some Lucas in when I get brakes working. Next is to pull the brake master, replace it, and bleed brakes. Pedal just goes to the floor. Got new tires this week. Waiting on wheel lug nuts, and wheel covers. Each wheel has either 2 or three nuts. Try to fine 9/16 LH lug nuts. Murray to the rescue!