Search results for query: Lug nuts

...types, the bending bar (which was the first type, from back in the 1960s) and the "clicker" (like everybody I knew had). I first used it on lug nuts, in a torque sequence. They were 1/2" drive, so I bought a 1/2" to 3/8" adapter at Sears. No problem. Later, I bought a clicker. What I...

...is concentric. Just like tire balance, the front end is much more sensitive than the rear axle when it comes to things that can cause a vibration. The swaged drum is not a safety thing. Once the lug nuts are tight, everything is tightly pulled together and the studs cant go anywhere. Jeff

It's embarrassing for me to have to ask, but what's the best way to get my wheel covers off? Typically wheel covers have a pretty pronounced lip a the edge where it's easy to pry, but my Fury's covers are remarkably flush to the rim face, and there's about half-an-inch of rim past the wheel...

...GM and sometimes cost a bit more... But if you've had other cars, you probably already know that. Grab a factory service manual and parts manual from MyMopar Remember left side wheels have left hand thread lug nuts and the distributor in your 413 turns counterclockwise and you'll be all set.

The ones on my Cuda were correct and I had checked with others that came with their cars and they matched mine. I do not believe yours are the original ones but aftermarket. Call up PG Classic as they are one of the best reproduction companies out there from my experience. They would not...

...been involved with different kinds of auto racing over the years. As with any garage you may take your car to, if yours still has left-hand lug nuts, point this out very clearly to them. When I took one of my cars to get new tires installed, I taped a note right on the fender. One catch with...

I was thinking about changing all the studs. Maybe changing both sides to right hand thread so my boys won't be confused. :lol:New lug nuts as well.

...driver was very helpful and made sure she had a hotel before he dropped her off. Great little Mom and Pop shop, replaced the studs and added lug nuts,moved her tire that came off to the rear. They even came to the hotel and picked her up. And checked all the other wheel torques. $257. Before...

...front drums don't come with hubs. It looks like the studs have been replaced, so it was pressed apart and the new drum just slid on. I did my Barracuda like this when I had to put new drums on it. So, nothing to worry about, the hub centers the drum and the lug nuts hold it together.

...the other is 440 ft.lbs ($160). I would tend towards the $75 model because of my anticipated very infrequent use. I wouldn't buy it for lug nuts, I use a cross wrench for that. I use elbow grease, 3/4 inch sockets and drives and extension pipes when I need to, and I generally get the job...

You have to get under the lip. I would start with a plastic trim tool to start, and finish with a bent tip pry bar or a wheel cover tool specific for that job.

I might need different lug nuts not sure to be honest

The lug nuts on my Ford Super Duty trucks have a similar design that doesn’t gall the aluminum rim.

...know how I got through life until then. Everyone should have a set of these in their box. These are better for this task than a die because these are made to clean up rather than cut a thread. Speaking of lug nuts. I bought a new set because these were worn. That's something to watch for.

...(or the ACTUAL center of rotation) of the rim vs the lug holes. In other words, our stamped steel rims are centered by the studs and lug nuts, not necessarily by the center hub hole. And certainly the magnum rims were not designed to be hub-mounted / hub-centered or hub-balanced. Next...

...wheel (where the center cap snaps in). For locating purposes against the wheel hub. But on the back, everything's located purely by the lug nuts, on those wheels. As to backspacing . . . that will depend upon if the Mustang uses a unified hub bearing mechanism or the old separate wheel...

...holes where the hubcap clips would have been riveted. Brake drums with an alignment pin, and wheel bolts. US cars have wheel studs and lug nuts. Seat upholstery is the same as the US Matador. [my car has the red and black interior] Black carpet in a red interior. I assume the US cars have...

Not sure what you all think longer studs or lug nuts

I have 2 of the dewalt 20 volt they were 320 for 1 but came with battery and charger one of them is the xr model and it's stronger than the other one they ar worth the money especially if you don't have air

...it with a shoe swipe of dirt. Will cut push button transmission cables when pulling M/T! Always will use high powered air tools or impacts to snap off rusty fragile bolts. Especially left hand thread Chrysler lug nuts. Git R Done guy means well but sure creates a lot more work in the...