Search results for query: HOSE!

NAPA 24058

The new pump bypass hose fitting is different. Luckily in the box it came with an adaptor to fit the new nipple.

Ben, It has been so long ago that I am sorry but I don't remember exactly. I do remember that NAPA sold me an adapter fitting to go into the splitter that they said would work but I didn't ; it was the wrong thread. I believe I took the old original hose to O'Reilly's and they were able to get...

Use a garden hose on high with a nozzle and light spray mist into it at 1200-1500 RPM. don't just pour from a jug.

I bought Inline Tube's product, which works very nicely for our '68, just as they did for our '66, though with this new radiator, I've had to use a hose for the line from the transmission, owing to the coolant connector being in a slightly different location from the factory radiator I ran prior...

This is a OEM Big Block Heater Hose Bracket. It came off of a 1968 440 with A/C, but may also work on other years and engines with or without A/C. It is original, not a china knockoff. It is not new, but is in good used condition. $15.00. Local pickup, or buyer pays shipping.

There is a short rubber hose where the fuel line goes into the stub frame at the front of the car at about the passenger seat, did you replace that hose? If the hose is good, if you have access to a smoke generator, disconnect the line at the fuel sensor and at the fuel pump. plug the line at...

I was wondering myself if someone had 3/8 hose on 5/16, agreeing with Big John.

The hose with the green stripe routes back to and through the firewall to feed the control switch assembly:

DON'T pinch the rubber hose w Channel locks much, lest you mangle the rubber hose, causing a leak. PLUG the hose w a 5/16" or 3/8" bolt instead. If you have some hemostats or a small "vice grip" that might pinch the hose shut sans much damage, but its best to plug it. Mind you, if you plan to...

What is "upgraded" fuel hose compared to "plain" mean? Do those come with glitter? What are you talking about?

I don't know the application difference in location of the return fitting, but IIRC some take a much larger hose (~5/8") and newer ones of this style take an 11/32" hose (just under 3/8"). My 65s have the huge hose, my 68 has the smaller. If I were in a bind, I'd take what I could find if all...

Hi thanks for these suggestions I will check them all out Thanks

Depending on the size of the leak in the green striped hose, it could affect the engine, but likely less than if the leak was in the line from the reservoir to the engine, or with a leaky reservoir itself. The reservoir could act as a buffer of sorts for the green striped hose and other...

Perhaps these are the right heater hose nipples?

I think I have found a cut in the vacuum hose from the vacuum reservoir on the fender of my '71 300. But I can't quite tell where the hose routes to so I can replace it. Does anyone know where this routes to? It is the line with the green stripe. Thank you, Todd

It was common to plug the EGR vac hose back then, keeping the valve closed. Better throttle response, especially off-idle , as things got back to normal from what it was with the EGR valve operational. It would be more incognito to put a ball bearing into the vac line where it plugs onto the...

Sure seems that way. Maybe they put a hose inside the car and water them for a year or two.

Thank you I didn’t use it so far it’s fine . Such a mixed bag of answers

For the short upper rad hose, a friend bought one of the coolant filters and installed.