Search results for query: wiring harness

Nice are a problem. I live in the country mice are here. I use traps I use dryer sheets I’ve tried everything They get into the car do whatever on the carpet and the car carries the smell when out for a ride Started the car this past winter and a mouse was outside the windshield complaining...

All the ABS components and wiring harness for abs is sold, @The_Eagles’_Nest graciously made be trip over and removed it all himself for a better part of the day, @traintech55 when that 2 door is ready for pick up I have to deliver some more parts on my way so everything works out

Check with Evans wiring. They had several harnesses for my 65 Polara. I bought the engine harness from them, and was very pleased with the quality and speed I got it. Swapping harnesses in a couple hours instead or rewiring for several days sounded much better for the minimal cost.

It's not totally trashed, but it's not good enough for what I'm aiming for. The insulation is brittle is numerous places, mice chewed on a lot of wires and so on and so forth. I would introduce a lot of old problems into the new car when using the old harness! And I have to change most of the...

I recently removed and refurbished the wiring harness in my '68 300, including the engine harness and the dash harness. Some of the connectors looked okay but most of the wires and connectors had corrosion that required replacing. Based on the picture you posted of your ammeter, I wouldn't...

Update: I fabricated new ground wires for the engine to firewall and negative cable and cleaned a ground cable I found in the headlight wiring harness. No change. Next, I conducted an in-vehicle test of the voltage limiter as found in the FSM using the temp sender. The VOM indicated fluctuating...

That Filko brand regulator you have there is one of the best in the business. You can still find new ones for sale on E bay.

Pulled the engine and front end lighting harness out of my '68 300. Every wire in the car seems to have been cut and taped back together. Luckily no evidence of a fire but it looked like a real possibility. The firewall connectors look good so that will be reused after being cleaned up...

While I don't have a link, there are videos on rebuilding the little plastic tubes that come out of the back. @Big_John may be able to help. Those AC switches were changed in 67, and an original replacement that will plug and play with your harness and vacuum hose routing will be hard to find...

72NYer hdtp doors, metal rusty,but doors have all glass and internal parts, power window motors, wiring and switches, and wiring harness from under dash to doors, in north Georgia $50. Local pickup

My green wire came through the pass side floor board and went over to the fan motor. Unhooked the connector about midstream of the wire and applied power and fan runs. 1969

...paint on these wheels matches what's on the car very exactly. I don't question that all this car came from MaPar. I've seen FoMoCo wiring harness in my '66, for the engine compartment leading to the front lights. I might even still HAVE that tidbit.... I took as much off Mathilda's wreck...

@TxDon Can you explain specifically where the red and green wire go to once they leave drier/receiver. I think you said you added a switch that wasn't OEM so I'm not clear where those wires go/do when the original system didn't use that thermo-cycling switch. Thanks.

Since we are redoing the interior we also want to upgrade all the old wiring etc while at it. I have been looking at complete kits like this from Painless: 21 Circuit Customizable 1966-76 Mopar Chassis Harness Part No 10127 Has anyone here any experience with this kit, or is there better...

Are you desiring a normal 4-wire trailer connector or a 7-wire connector? Most of the modern trailer wiring harnesses have a connector that matches the factory rear light connector, so it's a plug'n'play situation. Prior ones had to be hard-wired from the vehicle's wiring harness, I suspect...

I have a replacement engine wiring harness from Evans wiring, it has an extra female spade connector where the 12v ignition connects to the ballast resistor, conveniently located for my installation. It can be connected to any switched 12v.

Can you post a pic of that cable?

I had a 68 VIP. It had courtesy lamps at the kick panels mounted under the dash. And map light. Yes they used the pink and yellow wires. They were an option as part of the light group package. Body is ground so the yellow wire is on the door switch circuit and pink is on the dome lamp/ dimmer...

See here -- Evans Wiring did an outstanding job, and others have had similar experiences: Evans wiring Engine Wiring Harness

...MSD, about 8 owners ago, it was known to be good stuff. They even had some "-C" products which plugged right in to the OEM Chrysler wiring harness, too. To me, the referenced MSD 6AL unit is more of a drag racing item than something for a stock engined vehicle. BTAIM I'm NOT going to get...