Search results for query: motor mount

I would highly syspectg it should "bolt right in" with no issues . . . BUT there might be some differences in the motor mount type and mounting, between the model years involved. Also, there might be some differences in the way the accessories mount to the block, which could mean that you use...

i know its a 65/4? for what engine i dont know its nos mopar has date code if your into that stuff 25$+shipping only have the 1

Got my motor mounts from ebay and my tranny mount from RockAuto.

To put a 350 Chevy motor in the 1950 Imperial could be done, but I would advise against it. If you have welding skills, I'm sure you would need to weld up some motor brackets to mount it. The same would go for the transmission and all the linkage. The rear end and driveshaft would be another...

Miscellaneous NOS Dodge Truck Parts Lot Part Numbers Included: > 2232785 - Motor mount > 2961856 - Cushion / Rubber bushing (2 in package) > 2962032 - Bracket > 2490632 - Chrome window vent handle > 2507835 - 3rd gear > 4174383 - Sidemarker Lens - Red > unknown hinge / bracket ALL $75.00...

Rockauto does offer the mounts for your car. I recently purchased them for my '70 from RA, the fit great. 1978 CHRYSLER NEW YORKER 7.2L 440cid V8 Motor Mount | Shop Now at RockAuto

I don't know about the 1965 Poly, but the LA318 that I put in a '57 Belvedere bolted right up. The '57 mounts from the poly 301 (same as 318) bolted nicely to the LA318 with no issues. The LA318 was a 1974 motor and I installed it with the 904 torqueflite it came with. I did fabricate a tranny...

This is a OEM 1966 to 1972 Big Block Left Side Motor Mount & Bracket. It is used, but in good condition. $25.00. Local pickup or buyer pays shipping.

i swear when we put the 360 in our 65 fury race car in place of the poly I had to create one motor mount...since it was a race car we ran solid mounts so I just welded something up ...over 30 yrs ago so i don't remember specifics or know the correct fix....maybe adapter mounts were available...

Some recent improvements to DRK SD 73. The car spent a little time at @71Polara383’s garage. He installed Mity Mount motor mounts, a transmission mount and a torque strap. All of which combined to completely eliminate engine vibration at idle and during acceleration from a complete stop...

Poly 318 same bolt pattern as small block Mopar. Short list. Trans Upper motor mount. Isolator is the same. Have to get water pump housing that exits same side as the radiator lower, but the diameter may be different. There is a spring hose that has both sizes though. Or swap the...

i believe thats what it is i know based off whats there on part number its a 61 may work for other years? its nos 25$+ shipping

This is a OEM 1966 to 1972 Big Block Left Side Motor Mount & Bracket. It is used, but in good condition. $25.00. Local pickup or buyer pays shipping.

NAPA's "Balkamp" brand biscuit comes from Pioneer: I used one of these on the driver side when I dropped that 65-66 model 383 into Gertrude 4 yrs ago. I bolted on the OEM "strap" with it then. One of the Korean mounts serves on the passenger side. No noticeable vibrations and the engine...

Thank you for the answer! The '77 engine actually sounded pretty good before it was taken out, but I understand what you mean. I was actually considering converting the car to electronic ignition. I'm planning on using my intake and carb from my '69 block on this engine. I have a complete...

...the stater support in the trans to use a newer torque converter, a 360 TC won't install in a '66 trans. Get the different driver's side motor mount isolatior (340s and 360s use a different one) swap exhaust manifolds for the LA motor Have fun! I just remembered the 65 has a different drivers...

This is a OEM 1966 to 1972 Big Block Left Side Motor Mount & Bracket. It is used, but in good condition. $30.00. Local pickup or buyer pays shipping.

Quick question, did you have to remove the hood? I pulled my engine and trans separate, and left the hood on, but needed the intake off to give some extra clearance to the hood and to get over the core support with the accessories on and the taller oil pan. I also left the trans crossmember in...

I used this tool to replace all the block plugs with the engine in the car. I did need to disconnect the drivers motor mount and raise the block slightly, but it was a reasonably painless job. Mark...

.... Yes the lights flip up and down . Led headlights . Car is a 440 motor with a 727 transmission. Runs and drives great. May need a motor mount . We cruise it all over . No price on it primarily want to trade . WILL TRADE FOR A 2ND GEN CAMARO ONLY Seller information Seller details Dylan...