Search results for query: window removal

I concluded some time ago that the same blower motor is sold by a variety of suppliers ranging from Murray to Bosch to some others. The one I ended up purchasing last time I needed one was a little different in that it had the exact rubber drain tube attached to the round whole in the housing...

--> DL27L0D293310: Thank you for the pics of the car with the plates -- thanks to them, I've been able to track the registration to Sweden back in 2013 (in Tomelilla) and again in Falkenberg (in 2015). The last registration event is dated to 2019. Have you seen the car since? --> DL27G0D293351...

We always need pictures, especially around the window channel area where you removed the vinyl and also how dirty it is. Sealers works best on a clean surface. How you removed the vinyl 'remnants' is important as if you used any metal object ie knife, (putty or utility) screwdriver etc. if you...

The easiest way out might be to match the insert and the base channel and then replace only the rear quarter panel sections with longer ones. Look inside the trunk to seek if they are riveted on, too. Never did know of them being "screwed on", from what I saw down here. BTAIM ALSO peruse...

Seems like the FSM is VERY emphatic about the regulator spring issue, IIRC. But might there be a guide hole that a bolt can be inserted into and lock-nutted as later models were? Just curious. Back when the cars were new, power windows was something that not every car had, unlike modern...

Lower rear window water leaks/rust is NOT a Chrysler-specific issue as GM full-size cars of that era had a much worse situation. Enough so that 3M invented "AlumaLead" to plug the holes with, early on. Chryslers took much longer for that to happen as they obviouisly put more body paint in that...

It doesn't line up with anything, though. I was able to pivot the motor enough to disengage the gear, and allow manual movement of the window up and down. It needs to be lubed up, but that's gonna wait until later on. Once Summer is done, I'll tackle removal of the mechanism and repair the...

I've got a small area of rust on my C pillars right above the trim that separates the fender from the C pillar (non vinyl top). My internal sail panel cover is missing, but I'm not able to find where the attachment for the trim is. Is there a nut or nuts holding this trim in place? Are they at...

Thanks very much C barge, I was carefully looking at mine, and I could just see the screw heads under the Weatherstrip. Not a simple case of trim removal! Stubs, I like your idea, its the rear panel close to the back window. I think I will let a pro look at it , before I go any deeper.

Hello friends, I have to replace the gears of the windows motors. I replaced the driver's one, but when removing the motor, I broke the compensator spring ("clock" spring?). 1 : where can I find it? and 2, most important : is there a way to remove the WHOLE assembly, instead of only the motor...

Rescued this a couple of months ago. The title came in this week and it is officially mine! How do I remove the jy paint without stripping off the paint underneath? Looks like it was put on with a paint stick? I would ask about the best way to repair around the rear window, but I will search...

Bad thing about some Mopars is that although they might look really nice when new, if neglected they can get really ratty quickly. Personally, I'm not a big fan of that particular model year of Dodges. BUT, past that, the car looks like it needs some TLC and cleaning to look good again. BUT...

Disassembly well on the way for major paint. Painting to the inner edge of the door skins... lots of masking to hide edge of new paint. Thinking about fabbing up a pair of front of door shields for the rear doors (similar to Cadillac) to hide rear door hinges and wiring. Tape to temporarily...

I say go try one of those window scratch removal buffing kits and see what happens. Otherwise it looks like it might be time for new glass. There's really not much else you can do with old glass. Good Luck

So far I've put way more work and money into it then I expected to get it to this point, which is not fun on a college budget. Here's a rundown of all the work I remember doing to it so far: When I went to buy the car, the derby idiot had lost the keys, so I had to put in a new lock cylinder to...

Can you post the helpful threads for window removal? I can't remember, do you have power windows? Any dos or don'ts you found crucial in the removal? I remember hearing the rear 1/4s are a pain.

She's home! Took her for a quick test drive before paying for the job. What an improvement! The car tracks perfectly, smooth as glass at 70, and stops far better than it ever has. An enjoyable 13-mile ride home. Had to stop for fuel, as the 19-month old gas in it just wasn't fresh enough...

IMHO, I'd use the butyl like this: https://www.amazon.com/08611-Window-Weld-Round-Ribbon-Sealer/dp/B000CQ4AOE and not screw around with the urethane. People use different methods to remove the windshield, but what has worked for me (with the ribbon seal) is to take all the trim off inside and...

FYI, pages #16 and 17 in this thread (from 2018) show a little about rear quarter window trim removal and also the rear seat overhead A/C unit hanging down from the roof, if you need some details, I show the headliner removed. It’s very ‘gauzy’. You can see the “fiber filler” insulating pad...