Search results for query: wiring harness

...but 67 B Body is a little confusing. They show the light green wire being jumpered to the black connection instead of both being fed from separate fuses, but the wiring harness does not support that. Wonder if that is a mistake? All others have the black and light green going to separate...

If I had that problem I’d attack it two ways. First I’d find a service manual for my car. It will have wiring diagrams that include wire colors and wire gauge sizes. Second, in those years Plymouth and Dodge were essentially the same vehicle. Under the skin they shared everything. So I’d scour...

I'm calling 'wiring' different from 'ignition'. For 'wiring', I'm going with a kwik wire kit since all bulbs and items are 6V. the wires are meh and the insulation is worse (being a 70 year old car). My goal its to get it running and wrench on more correct methods during the off season. (similar...

Thank you. I will start chasing wires and grounds this weekend.

When I've done those, I use a piece of plywood and some finishing nails. I've seen this in a few factories where they are assembling a wire harness.

I fitted my '71 Imperial with power door locks when it did not have that option. I did this with all stock parts and wiring. I did not add remote activation, though. I believe it could be possible to add some form of remote activation control to the power door switch harness in the driver's...

Late to this party but as mentioned get a good used factory harness, go through it and repair as needed. This is where the FSM wiring diagrams come in handy From my experience, using a multi meter I test continuity on each and every circuit. If you have to open up the harness to do any repairs...

...the 3-prong switch, sounds like you have good continuity to power from fusebox at one outside terminal. Generally, you need continuity from the other outside terminal through the firewall bulkhead connector to the left kick panel connector. I suspect this part of your wiring harness is the...

One way to run added loads with this system. Leaves the ammeter function intact and retains the factory dash harness and circuit protection.

The original Painless Wiring kits were for street rods. That is its heritage. Street rods that needed a full re-wiring, front to back. Their "ace in the hole" was the use of OEM-level Packard wiring wire and terminals. The two guys that started the company did that work in their garage for...

One nagging thought I have about this whole thing is, we NEVER know if a current or prior owner had even added something into the factory wiring or had made some "mods" to the factory wiring before their particular melt-down happened? I had previously heard of how "bad" the wiring was on the...

I tried to call awhile back, but the call did not go through. Here is an update regarding your list. Wiring harness - gone. Dash pad - rotted. Does not have cruise control. Steering column is available. Inside rear window trim is available. Rear light trim pieces are available.

By chance do you have the wiring adapter harness the goes from the steering column to the dash harness? found out the 1976 column I am putting in my 1977 is different.

I was just thinking that I should see about some new cables while the GA4 is still dry docked. Evans even also sold me a battery terminal for my previous C a few years ago. It had set screws which allowed me to keep my still good + cable. The GA4's battery terminals had been replaced with...

1955 Chrysler New Yorker Chrysler New Yorker Deluxe. 331 hemi. Super clean car. Everything is there. Interior was removed to replace wiring harness. Super cool project for someone to finish. You won’t find another one of these Note: the glass looks like it was also removed for the wiring...

Another question ❓. How many volts runs the dash lamps? I only have have two dim lamps above the dash and want to add led lamps. If I plug the harness across the battery with 194 bulbs, I get nothing. I know they work. If I plug in the 2 led bulbs, the wiring gets hot.

Chrysler part Number 4048867 was originally equipped in the following vehicles: - 1978 - 1981 B-series van and MB-series motor home chassis - 1981 D/W/AD/AW-series pickup tracks and Ramcharger 4048867 is the package part number which would appear in part listings and on the box. 4048869 is the...

Very commendable. Clean is keen! Shiny conductor surfaces conduct better, period. I would strongly consider using regular female bullet terminals IFF one could make the tight bend to fit in a tight space without exposing conductor to a big nasty short circuit....

Hang in there. It takes time especially if you hate electrics like me, but only way I could get it done.

Those are incorrect.