Search results for query: hanger

It’s used good for parts or core to plate or wall hanger 15+shipping

No, this is the curved bracket hanger hanger that bolts under the floor to the rear crossmember. Its for the exhaust pipe not the brakes. thanks

I did see that as well. Nice exhaust hanger too!

My apologies for not being clearer. I mean the plates that box in the forward leaf hanger bulkhead. Factory torque box: Without torque box: I'd be interested in those added plates cutout at the factory seams so it can be welded into another car if it's in good solid condition. Thanks!

I am gathering my hardware. I ordered an NOS tailpipe clamp, and 2 new 2 1/2” clamps from Accurate Exhaust. I also ordered an NOS tailpipe hanger.

Useable dual exhaust brackets that go above the rear axel. $40 plus shipping

On mine I replaced the leaf springs and hardware, so I did not have to worry about that (mine may have fallen out of the bushing anyway) but on other makes if tapping them out with penetrant-soaking does not work, I sometimes chew through the rubber between the spring eye and the bolt with an...

https://www.forcbodiesonly.com/mopar-forum/threads/69-sport-fury-parts-for-sale-pittsburgh-carlisle-pa.83480/

...over 100,000 miles on it, and it smoked out of the valve cover breather. An older mechanic told us to remove the valve covers and use a wire hanger to open up the oil return passages in the heads. We did it and it worked. The oil back then was nowhere as good as today's blends. If you did not...

Remove all the freeze plugs from the block then scrape the crud out of the water jackets with a coat hanger rinse it out with a garden hose. Rinse out the radiator and heater core so no antifreeze left in them. Install all new freeze plugs. Use thermo cure from evaporatorust. fill the...

...eye broken So I went up to work for an emergency repair (cobble job) I dug around and found a bushing, then blasted the outer piece of the hanger I used the plasma cutter to make a piece for the rear of the hanger This is the piece welded in place I bolted the bushing in place...

I need one 1969 Chrysler 300 tail light lens. used with minor cracks OK. right and left are the same I think. It's for a wall hanger assembly so cheap is good.... Thanks Will.

My Rt Side hanger. No tabs

https://www.doctordiff.com/71-72-b-body-offset-spring-hanger-shackle-kit.html

Hi Steve, Thanks but I only need the wire clamp that screws onto the bottom of these, clamping the pipe to the hanger. I already have good originals of the main parts.

I checked my lens I only have 68 300. Sorry

Yeah, I noticed that too. My T&C will have more info as to the front hanger types, plus how they fit in the holes - it's pretty much unmolested that way. From what I can see on my Monaco, the holes are balanced on both sides to permit the use of the same hanger on either side (and make it not...

I didn’t know they made that product it might be a game changer thanks

That’s more along of what I was thinking, or peeling back the edge, then using a hammer to “re-fold“ it back into place. This method is certainly easier.

https://www.hiltopautoparts.com/product/nos-mopar-left-tail-pipe-hanger-1967-71-c-body-383-440-dual-exhaust/ I also have an old one like that that I've kept for some reason. And I note that Hilltop has one listed (NOS) for $175. I don't know why they say it's for 383/440 dual exhaust, because...