Search results for query: Holley 2210

hello everyone, i haven't been in the forum a ton the last few months. i have a 1973 newport with the 400, holley 2210 and i don't have points in my distributor, but i have that little magnet with the splined thing in the middle, i don't remember the technical name. anyway, the car ran pretty...

...1&2 BBL Choke Pull Off. It works good but could use a cleanup. $15.00. Local pickup or buyer pays shipping. Fits: CHRYSLER (8) 1970-74 DODGE (6, 8) 1965-74 DODGE TRUCK (6, 8) 1971-81 PLYMOUTH (6, 8) 1965-74 Holley 1920 1 bbl carburetors Holley 2210 2 bbl carburetors Holley 2300 2 bbl carburetors

So carb isn’t worth rebuilding, JEGS remanned unit? I’m sorry I’m not trying to be lazy just smart as I’m not as familiar with carbs as I am fuel injection. Can you guys send some links or suggest some good places to buy a replacement 2210.

so i'm going to stick to a carb, and have seen suggestions to replace the 2210 with a holley 2300 w/electric choke. i'm currently searching the forum to see if i can find a post about it, but no luck yet. anyone reading this done the swap, and/or know where a discussion can be found giving...

...to hook up, such as the Chrysler kick down linkage stud. Any decent shop familiar with older cars should be able to handle the carb swap. The Holley 2210 is one of the biggest piles of garbage ever used to meter fuel into an engine. Any change that you make will surely be for the better. Jeff

The bolt pattern for the WWC3 is the same as the later-used Holley 2210-family carbs used into the 1970s on B-engine 2bbl intakes. Should be the same bolt pattern as the 1.56-1,69" throttle bore Rochester 2bbls, too. NOT to forget the Carter BBD 1.56" throttle bore 2bbls used in the late 1960s...

...Fits: CHRYSLER (8) 1970-74 DODGE (6, 8) 1965-74 DODGE TRUCK (6, 8) 1971-81 PLYMOUTH (6, 8) 1965-74 Holley 1920 1 bbl carburetors Holley 2210 2 bbl carburetors Holley 2300 2 bbl carburetors Pull-off fits the following carburetor numbers: R-3053A, R-3054A, R-3055A, R-3056A, R-3057A, R-3058A...

I have posted a number of comments about the Holley 2210 - here they are...........................: =saforwardlook&o=relevance']Search results for query: Holley 2210

The Holley 2300 is a Ford-spec carb, some of which are 500cfm. The PROBLEM with using one of them is the base plate pattern is unique to it, period. Adapters do exist, but that can cost hood clearance for the air cleaner. Not sure if the base circle of the 2300 matches your existing 2210 air...

After reading and seeing the 2210 is not such a great carb reliability wise, anything that I can swap it with besides the carter unit I’ve been told these could have also came with? Any more reliable carb that will slap onto my current intake? I know if I want a 4 barrel I must swap my intake...

...can be seen in the FSM pictures. The "318 size" BBD also has 1.44" throttle bores. It was replaced in the 1970 model year with the Holley 2210 family carburetors. With the Holley 2245 2bbl in '73, with the addition of EGR to the carb and intake. Both of these carbs look the same, with the...

360 small block with the stock Holley 2210 2 bbl im fairly certain

My 1972 Fury Gran Sedan has a Holley 2210 as original equipment on its 400ci.

...drivability, if that is the only thing you are looking for. But some serious tweaking on the existing carb might do that too. FYI, the Holley 2210 2bbl is for non-EGR engines and the similar Holley 2245 is for EGR applications. You should have the 2245. BOTH are of the same family and...

...Fits: CHRYSLER (8) 1970-74 DODGE (6, 8) 1965-74 DODGE TRUCK (6, 8) 1971-81 PLYMOUTH (6, 8) 1965-74 Holley 1920 1 bbl carburetors Holley 2210 2 bbl carburetors Holley 2300 2 bbl carburetors Pull-off fits the following carburetor numbers: R-3053A, R-3054A, R-3055A, R-3056A, R-3057A, R-3058A...

Yes, the Holley 2210-family or 2bbls. Nice carburetors, but prone to the same throttle stud wing nut over-torque issues as Stromberg WWC3 2bbls before them, unfortunately. Not the same Holley 2300-family of 2bbls that Summit and Jegs sell, with the need for an adapter plate to bolt to a normal...

...intakes. When you watch him "do his magic", it all makes sense! Just like they cast a 318-size BBD flange into the normal BBD 1.5/Holley 2210 intake for the 1980 model year. Using an existing casting that works well and changing the mounting flange casting as needed saves corp money...

...Fits: CHRYSLER (8) 1970-74 DODGE (6, 8) 1965-74 DODGE TRUCK (6, 8) 1971-81 PLYMOUTH (6, 8) 1965-74 Holley 1920 1 bbl carburetors Holley 2210 2 bbl carburetors Holley 2300 2 bbl carburetors Pull-off fits the following carburetor numbers: R-3053A, R-3054A, R-3055A, R-3056A, R-3057A, R-3058A...

318willrun? 318willrun

Maybe this would be better in the engine forum but I feel it applies more to our era cars. Has anyone ever swapped a Holley 2210 with a BBD? Do they bolt up on the same manifold? I’m having issues with my Holley and plan next year to swap to a TQ, but for now I have a good operating free BBD I...