Search results for query: *

https://www.facebook.com/share/1F35BBMMiX/?mibextid=wwXIfr Wish i was in a position to buy

Traced out my blower motor issues to being in the heater/AC controls. power goes in, doesn't come on when the hvac system turns on. Anyone disassembled one of these switches? I might try repairing it in the future, but for now it's bypassed and the fan runs on low at all times. Or else...

Anyone from here planning to attend? Some friends bought a parking block and invited me to hang with em, so we are driving down for the weekend.

Just looking for a way to search posts by legendary members. It won't allow it. I know I have read a few of my dad's (Polara_500) posts about an issue I am having with what was his car, but I can't search for them and paging through EVERY old post is very slow.

https://www.febook.com/marketplace/item/523216877136601/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp%3A1fd75ff0-e48f-494f-84ad-ca0abd080ed0

Mornin all. I'm not sure where to start, so let's hope someone here can get me pointed the right direction. 383/4 bbl. 4 speed. New clutch, new a833, new driveshaft, new AVS2 800 carb. 383 with fresh rebuilt heads. maybe 500-1000 miles on it since the work was done. Accelerating is smooth...

@LocuMob hello there.... your mailbox seems to be full

Here's my situation. I put dad's car back together, but now would like to lower RPM's on the highway. I know taller tires would help, but these are a little too new/nice to swap out yet. It has a sure grip with 3.23's (pretty sure based on his comments on here). I could look for a .276 diff...

1968 Plymouth fury iii · 2dr

Any real interest in a kit like this? Looks 100% complete. Windshield and back window still in plastic. Not assembled. If there is interest, I can take pics of the parts and bits. Even includes a 6o year old spare rubber band for the spinny stand!

Anyone here from the area? working for the next weekish here and don't know what's good for food, things to see etc? Any good shows over the weekend I can hit and see some new to me cars?

Am I reading this right that I have to pull the heater box out the bottom to reach the fan switch to test/replace it?

I can't seem to get enough adjustment to make this mirror functional. I also can't find a reference to one actually existing so..... Anyone dealt with these? Have an idea on how to adjust it?

Looking for a trim ring for a 15" road wheel. I think it's the 6.5' version and not the 7" the pic here is the one that is a little too wide, and the one i need has a round hole and not an oblong one. The incorrect one is 3" wide

I am trying to clean up and organize the shop a bit at Dads..... him and grandpa were both packrats and I am not. All of these are in the back of the garage, and I will NOT be using them on either/any of my cars.... Please help me Identify what they are for. Some of them I have many of. I...

Ok, the polara came home last night, ended up putting about 200 miles on. One issue popped up but I resolved that. Now I realized that the heat stays on even when off is selected. The ac was working, but now that the heat was run it seems like maybe both are running when set to ac. Is there a...

1970 Plymouth Fury III convertible

Car looks pretty incredible condition. Only a few hours from here too! https://duluthmotorsports.com/vdp/20179314/Used-1969-Dodge-Polara-500-for-sale-in-Duluth-MN-55811

So Tracing wiring I learned my dad had rewired the headlights of the Polara. Not surprised, we're both electrical minded people. What I thought curious is that the 2 relays and fuses (high&low) are both mounted right under the battery on the left front of the engine compartment. The power...

Wrapping up what I think are the last few items here. Installed the clutch fork boot and want to verify the parts order is right here…. On the roof, the nut, washer, then insulator in the clutch fork.. Verifying there is no nut on the back????